1208-ETN9 bearing: complete specifications & equivalents
The 1208-ETN9 is a ISO 15 radial bearing sized 40 x 80 x 18 mm (bore x OD x width). Verify dimensions against the official catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Brand | SKF |
| Bore diameter d | 40 mm |
| Outer diameter D | 80 mm |
| Width B | 18 mm |
| Material | GCr15 |
| Seal / shield | open |
| Internal clearance | CN |
| Tolerance class | P0 |
| Cage | polymer (PA66 glass-fibre reinforced) |
| Basic dynamic load rating C | 19.9 kN |
| Basic static load rating C0 | 6.95 kN |
| Fatigue load limit Pu | 0.36 kN |
| Reference speed (thermal) | 18000 rpm |
| Limiting speed (mechanical) | 11000 rpm |
| Operating temperature | -40 to +120 °C |
| Mass | 420 g |
| Manufacturer designation | 1208 ETN9 |
| Standard | ISO 15 |
| Catalog version | SKF PUB BU/P1 17000/1 EN (Oct 2018) |
| Last verified | 2026-09-27 |
Source: catalog reference (SKF PUB BU/P1 17000/1 EN (Oct 2018)) · extracted 2026-09-27
Parameters extracted from the official SKF Rolling Bearings catalogue (SKF PUB BU/P1 17000/1 EN (Oct 2018)); SKF® and SKF Explorer® are trademarks of AB SKF, used here for identification only — mpnbase is not an authorized SKF distributor. Boundary dimensions are ISO 15 interchangeable; current production values may differ, verify at skf.com.
Dimensions in inches & 1200-series range
| Bore d | 1.575 in |
|---|---|
| Outer diameter D | 3.15 in |
| Width B | 0.709 in |
| ISO bore code | 08 |
| Radial section height (D−d)/2 | 20 mm |
| Smallest bore in 1200-series | 6 mm |
| Largest outer diameter in 1200-series | 230 mm |
| Width range across 1200-series | 6–154 mm |
| Bore position in 1200-series (smallest first) | 13 of 32 |
| Bore above smallest 1200-series size | 34 mm |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| 1208 | NTN | full Dimensions and internal design equivalent — standard interchange. | Identical ISO 15 envelope, seal and ratings band — standard interchange; re-verify precision class and clearance per supplier. |
| 1208-EKTN9 | SKF | full Dimensions and internal design equivalent — standard interchange. | Same 40×80×18 mm envelope with catalogue ratings within 10 %; 1208 EKTN9 is the glass-fibre PA66 cage, open arrangement, tapered bore execution of this size — boundary dimensions interchangeable, only the seal/cage/bore execution differs. |
| 11208-TN9 | SKF | full Dimensions and internal design equivalent — standard interchange. | Same 40×80×18 mm envelope with catalogue ratings within 10 %; 11208 TN9 is the glass-fibre PA66 cage, open arrangement execution of this size — boundary dimensions interchangeable, only the seal/cage/bore execution differs. |
Interchange levels: full standard interchange · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the 1208-ETN9 model number is decoded
The 12xx series is the light/normal-section self-aligning ball bearing (ISO dimension series 02). the last two digits encode the bore: 1208 carries code 08 = 40 mm (code × 5). Envelope 40×80×18 mm (1.575×3.15×0.709 in) with a 20.0 mm radial section height, C 19.9 kN, C0 6.95 kN and Pu 0.36 kN. The open 1208 ETN9 carries no shields or seals and relies on application lubrication and external sealing. The ETN9 suffix identifies the glass-fibre-reinforced polyamide 66 cage execution. The bore is cylindrical (straight), for a press-fit on a 40 mm shaft. Reference (thermal) speed 18000 r/min, limiting speed 11000 r/min, catalogue mass 420 g.
Typical equipment & failure modes
Common applications
- industrial fans and blowers
- woodworking machinery
- pump shafts with mild misalignment
- material-handling equipment
Known failure patterns
- lubricant starvation where no regreasing interval is maintained
- contamination wear when the open arrangement is used without adequate external sealing
- electrical pitting in VFD-driven motors without shaft grounding
- excessive misalignment loading one ball row heavily and spalling it early
Selection pitfalls — read before you substitute
- Mount 1208-ETN9 by heating the inner ring (max 120 °C) on a cylindrical bore — driving it home through the outer ring or balls brinells the raceways.
- Fillet radii must clear the 1208-ETN9 chamfer so the 18 mm-wide ring seats square; an oversized shaft radius creates point contact on the ring face.
- The ETN9 suffix on 1208-ETN9 denotes a glass-fibre-reinforced polyamide 66 cage: quiet and light at the 11000 r/min limiting speed, but it softens above roughly 120 °C — check the oil temperature in hot drives.
- Catalogue ratings for 1208-ETN9 (C 19.9 kN, C0 6.95 kN) are SKF figures from PUB BU/P1 17000; geometry revisions can change ratings without changing the designation, so keep the catalogue edition with the specification.
- Mount 1208-ETN9 by heating the inner ring (max 120 °C) on a cylindrical bore — driving it home through the outer ring or balls brinells the raceways.
- The fatigue load limit is 0.36 kN; it feeds the equivalent-mean-load check, not the basic life calculation — do not substitute one for the other.
Frequently asked questions
What are the dimensions of 1208-ETN9?
SKF 1208 ETN9 measures 40 mm bore × 80 mm OD × 18 mm width (1.575 × 3.15 × 0.709 in), mass about 420 g. It is open, with no shields or seals.
How does the bore code in 1208 work?
The final two digits of 1208 are bore code 08, multiplied by 5 to give 40 mm.
Which fits should I use for 1208-ETN9?
With a rotating inner ring use roughly k5 on the shaft and H7 in the 80 mm housing; reverse the interference if the outer ring rotates.
How heavy is 1208-ETN9?
Catalogue mass is 420 g for 1208 ETN9; seal and cage executions of the same envelope differ by a few grams.
Reviewed & verified by the MPN Base engineering desk against source catalog SKF PUB BU/P1 17000/1 EN (Oct 2018) on 2026-09-27. Read our editorial & correction policy.