2313K bearing: complete specifications & equivalents
The 2313K is a ISO 15 radial bearing sized 65 x 140 x 48 mm (bore x OD x width). Verify dimensions against the official catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Brand | NTN |
| Bore diameter d | 65 mm |
| Outer diameter D | 140 mm |
| Width B | 48 mm |
| Seal / shield | open |
| Basic dynamic load rating C | 97 kN |
| Basic static load rating C0 | 32.5 kN |
| Fatigue load limit Pu | 1.4 kN |
| Limiting speed (mechanical) | 3800 rpm |
| Mass | 3200 g |
| Manufacturer designation | 2313SK |
| Standard | ISO 15 |
| Catalog version | CAT. No. 2203-3/E 2024 |
| Last verified | 2026-09-25 |
Source: catalog reference (CAT. No. 2203-3/E 2024) · extracted 2026-09-25
Parameters extracted from the official NTN Ball and Roller Bearings catalogue (CAT. No. 2203-3/E 2024); NTN® is a trademark of NTN Corporation, used here for identification only — mpnbase is not an authorized NTN distributor. Boundary dimensions are ISO 15 interchangeable; current production values may differ, verify at ntnglobal.com.
Dimensions in inches & 2300-series range
| Bore d | 2.559 in |
|---|---|
| Outer diameter D | 5.512 in |
| Width B | 1.89 in |
| ISO bore code | — |
| Radial section height (D−d)/2 | 37.5 mm |
| Smallest bore in 2300-series | 10 mm |
| Largest outer diameter in 2300-series | 215 mm |
| Width range across 2300-series | 17–73 mm |
| Bore position in 2300-series (smallest first) | 14 of 21 |
| Bore above smallest 2300-series size | 55 mm |
Cross references & equivalents
No verified interchange data yet. Send an inquiry and our team will confirm equivalents manually.
How the 2313K model number is decoded
In the 2300-series (ISO 15 dimension series) the leading digits 23 mark a double-row self-aligning ball bearing and the last two digits encode the bore: 2313 carries bore code 13 = 65 mm. Outside diameter 140 mm and width 48 mm follow the ISO 15 general plan. The K suffix denotes a 1:12 tapered bore for mounting on an adapter sleeve or tapered shaft seat; the cylindrical-bore equivalent is 2313. Two rows of balls run on a common sphered outer raceway, allowing the inner ring to pivot and compensate for shaft deflection or housing misalignment.
Typical equipment & failure modes
Common applications
- gearbox and speed reducer shafts
- conveyor and material handling drives
- textile and printing machine spindles
- paper mill and processing equipment shafts
Known failure patterns
- contamination wear from dust and dirt ingress through the open arrangement
- lubricant starvation when no regreasing interval is maintained
- cage wear or fracture from sustained vibration or shock loading
- false brinelling from vibration while the shaft is stationary
Selection pitfalls — read before you substitute
- Temperature rise and interference fits consume internal clearance on this 65 mm bore: a CN bearing on a tight, hot shaft can lose all residual clearance — size 2313 with C3 for those conditions.
- The 23xx heavy wide-section at 65 mm bore is built for high-load, lower-speed duty; specifying it in a high-rpm application gives excess heat and short grease life — use 12/13 there.
- Tapered-bore 2313K requires a matching adapter sleeve (e.g. H2xx for small bores, H3xx for larger); verify the sleeve bore code matches the 65 mm shaft before ordering.
- The adapter sleeve adds length and a small radial step; check that the housing bore and shaft shoulder clear the sleeve nut and that the withdrawal nut is accessible for future dismounting.
- Shaft and housing fillets must clear the bearing chamfer so the 48 mm-wide ring seats square; provide an undercut or withdrawal groove instead of relying on an oversized radius.
Frequently asked questions
What are the dimensions of a 2313K self-aligning ball bearing?
A 2313K self-aligning ball bearing has a 65 mm bore, 140 mm outer diameter and 48 mm width, per ISO 15 boundary dimensions. The K suffix indicates a 1:12 tapered bore for adapter-sleeve mounting; the cylindrical-bore version is 2313.
How does the 2313 bore code work?
The last two digits of 2313 are bore code 13, giving 13 × 5 = 65 mm bore. The 140 mm outside diameter and 48 mm width follow the ISO 15 diameter series, not the bore code alone.
What does the K suffix mean on 2313K?
The K suffix denotes a 1:12 tapered bore for mounting with an adapter sleeve. The cylindrical-bore equivalent is 2313. Adapter sleeves are sold separately and must match the bore code.
How does the 2300 compare with other self-aligning series at the same 65 mm bore?
The 23xx is the wide heavy section: 140×48 mm, 37.5 mm radial section at 65 mm bore — the highest-capacity double-row self-aligning option here, aimed at lower-speed, high-load shafts.
Reviewed & verified by the MPN Base engineering desk against source catalog CAT. No. 2203-3/E 2024 on 2026-09-25. Read our editorial & correction policy.