H-2313-E adapter sleeve: complete specifications & mounting data
The H-2313-E is an adapter sleeve sized 65 x 85 x 65 mm (tapered bore x sleeve OD x width) for a plain 60 mm metric shaft with M 65x2 thread supplied with the KMFE 13 lock nut at 530 g per ISO 2982-1. Verify dimensions against the official catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Brand | SKF |
| Bore diameter d | 65 mm |
| Outer diameter D | 85 mm |
| Width B | 65 mm |
| Fits shaft diameter | 60 mm |
| Sleeve thread G | M 65x2 |
| Included lock nut | KMFE 13 |
| Associated hydraulic nut | HMV 13 E |
| Material | Carbon_Steel |
| Mass | 530 g |
| Manufacturer designation | H 2313 E |
| Standard | ISO 2982-1 |
| Catalog version | SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 23.1 adapter sleeves for metric shafts |
| Last verified | 2026-09-30 |
Source: catalog reference (SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 23.1 adapter sleeves for metric shafts) · extracted 2026-09-30
Parameters extracted from the official SKF Rolling Bearings catalogue (SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 23.1 adapter sleeves for metric shafts); SKF® and SKF Explorer® are trademarks of AB SKF, used here for identification only — mpnbase is not an authorized SKF distributor. Boundary dimensions are ISO 15 interchangeable; current production values may differ, verify at skf.com.
Dimensions in inches & H23-series range
| Bore d | 2.559 in |
|---|---|
| Outer diameter D | 3.346 in |
| Width B | 2.559 in |
| ISO bore code | — |
| Radial section height (D−d)/2 | 10 mm |
| Smallest bore in H23-series | 65 mm |
| Largest outer diameter in H23-series | 155 mm |
| Width range across H23-series | 65–112 mm |
| Bore position in H23-series (smallest first) | 1 of 4 |
| Bore above smallest H23-series size | 0 mm |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| H | ISO 15 | full Dimensions and internal design equivalent — standard interchange. | ISO 15 boundary-dimension envelope; standard interchange — confirm clearance class and precision with the supplier. |
Interchange levels: full standard interchange · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the H-2313-E model number is decoded
the M 65x2 thread spans about 32.5 nut turns across the 65 mm width; each indexed turn is a measurable drive-up step when setting the bearing clearance on the 65 mm seat the KMFE 13 lock nut carries size index 13, matching the bore-code family of the 65 mm seat; the nut engages the M 65x2 sleeve thread over its full width mounting and dismounting stay purely mechanical: the KMFE 13 nut drives the taper home, and backing the nut off releases the 65 mm seat without oil-injection tooling the annular envelope between 65 mm bore and 85 mm OD is about 2,356 mm² in cross section, which sets the 530 g mass at steel density for the 65 mm-long slit bush the OD-to-bore ratio is 1.31: the 85 mm sleeve OD is only 10 mm of section beyond the 65 mm seat, leaving room for the bearing outer ring without enlarging the housing bore with a 60 mm shaft this sleeve covers the most frequently replaced bearing seats, where using a plain shaft and sleeve avoids the cost of a stepped, ground shaft E on this catalogue number signals self-locking hardware — the KMFE 13 nut is tightened to the seat, then its integral screw is set against the M 65x2 thread as the final step the H23 designation block places it in the wide-section H 23 range sized for 223..K spherical roller bearings — every sleeve in the block uses the same bore-code logic, and here the 65 mm tapered bore matches the K-suffix bearing it is ordered for the KMFE 13 lock nut ship in the kit; controlled drive-up uses the HMV 13 E hydraulic nut rather than a spanner typical applications include quarry conveyor head and tail drums, cement plant kiln and mill trunnion drives and printing press cylinder journals adapter sleeves earn their place wherever a tapered-bore bearing must sit at any axial position on a plain shaft — here a 65 mm bore bearing on a 60 mm shaft in printing press cylinder journals the sleeve lets the designer use a plain, unstepped shaft and still locate the bearing positively; only one shoulder is needed, opposite the KMFE 13 nut ordering digest — H 2313 E: 60 mm plain shaft to 65 mm tapered bore, sleeve 85 mm OD and 65 mm wide, thread M 65x2, supplied with KMFE 13 self-locking nut, drive-up tool HMV 13 E; listed mass is 530 g
Typical equipment & failure modes
Common applications
- agricultural machinery axle and PTO shafts
- quarry conveyor head and tail drums
- paper machine roll and cylinder journals
- mining crusher and screen exciter shafts
Known failure patterns
- interchanging nut families (KM vs KMFE, MB vs MS) across executions loses locking reliability even when the thread appears to fit
- neglecting the catalogue axial displacement value leaves the bearing either loose on the taper or preloaded hot in service
- the KMFE 13 self-locking nut must not be replaced with a standard KM nut, which has no integral device to grip the thread
- driving the bearing via the outer ring during mounting loads the rolling elements; force is always applied through the lock nut on the inner ring
- the integral locking screw must be set to the catalogue torque; over-setting galls the M 65x2 thread and makes removal difficult
Selection pitfalls — read before you substitute
- interchanging nut families (KM vs KMFE, MB vs MS) across executions loses locking reliability even when the thread appears to fit
- the KMFE 13 self-locking nut must not be replaced with a standard KM nut, which has no integral device to grip the thread
- over-driving the taper eliminates bearing internal clearance entirely; clearance reduction must be measured with feeler gauges, not estimated from nut torque
Frequently asked questions
What shaft size does the H-2313-E adapter sleeve fit?
H 2313 E is listed for a 60 mm plain shaft; its tapered bore accepts 65 mm K-suffix bearings, the sleeve measures 85 mm OD and 65 mm wide.
What does the H 2313 E designation mean?
H 2313 E: H-series metric adapter sleeve in the H23 dimension plan; the code resolves to a 65 mm tapered bore and a 60 mm shaft.
What is supplied with the H-2313-E?
Supplied hardware is the KMFE 13 lock nut. Drive-up is done with the HMV 13 E hydraulic nut.
How much does the H-2313-E adapter sleeve weigh?
It weighs 530 g; the figure is the sleeve-only catalogue mass, with the KMFE 13 nut counted on the same product row but the hydraulic tool ordered separately.
How is the H-2313-E mounted on the shaft?
Slide the sleeve onto the 60 mm plain shaft against the abutment, fit the bearing, turn the KMFE 13 nut with a hook spanner until the measured clearance drop matches the table, and lock it via its integral screw.
Reviewed & verified by the MPN Base engineering desk against source catalog SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 23.1 adapter sleeves for metric shafts on 2026-09-30. Read our editorial & correction policy.