C6912-2NSV bearing: complete specifications & equivalents
The C6912-2NSV is a ISO 15 radial bearing sized 60 x 85 x 45 mm (bore x OD x width) with 2RS sealing. Verify dimensions against the official catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Brand | SKF |
| Bore diameter d | 60 mm |
| Outer diameter D | 85 mm |
| Width B | 45 mm |
| Material | GCr15 |
| Seal / shield | 2RS |
| Internal clearance | CN |
| Tolerance class | P0 |
| Cage | none |
| Basic dynamic load rating C | 190 kN |
| Basic static load rating C0 | 335 kN |
| Fatigue load limit Pu | 39 kN |
| Operating temperature | -40 to +120 °C |
| Mass | 830 g |
| Manufacturer designation | C 6912-2NSV |
| Standard | ISO 15 |
| Catalog version | SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 10.1 CARB toroidal roller bearings |
| Last verified | 2026-09-27 |
Source: catalog reference (SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 10.1 CARB toroidal roller bearings) · extracted 2026-09-27
Parameters extracted from the official SKF Rolling Bearings catalogue (SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 10.1 CARB toroidal roller bearings); SKF® and SKF Explorer® are trademarks of AB SKF, used here for identification only — mpnbase is not an authorized SKF distributor. Boundary dimensions are ISO 15 interchangeable; current production values may differ, verify at skf.com.
Dimensions in inches & C6900-series range
| Bore d | 2.362 in |
|---|---|
| Outer diameter D | 3.346 in |
| Width B | 1.772 in |
| ISO bore code | 12 |
| Radial section height (D−d)/2 | 12.5 mm |
| Smallest bore in C6900-series | 45 mm |
| Largest outer diameter in C6900-series | 105 mm |
| Width range across C6900-series | 40–54 mm |
| Bore position in C6900-series (smallest first) | 4 of 5 |
| Bore above smallest C6900-series size | 15 mm |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| C6912-V | SKF | full Dimensions and internal design equivalent — standard interchange. | Same 60×85×45 mm ISO 15 envelope and equivalent catalogue C/C0; C 6912 V is the cylindrical-bore full-complement V execution of this size — boundary dimensions interchangeable, only mounting and cage execution differ. |
Interchange levels: full standard interchange · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the C6912-2NSV model number is decoded
C 6912-2NSV is a CARB toroidal roller bearing to ISO 15: a single row of long, symmetrical barrel-shaped rollers between guide flanges, sized 60×85×45 mm, as listed in SKF catalogue PUB BU/P1 17000 ch. 10.1. SKF builds the CARB order number from size plus execution: the bare number C 6912 is the full-complement cylindrical-bore bearing, K (or K30) makes the bore tapered for sleeve mounting, and the cage/seal letters follow — here 2NSV. CARB bearings locate neither radially nor axially: the inner ring can walk axially inside the outer ring over the catalogue-listed axial-displacement range (s), so shaft thermal growth disappears as thrust rather than preloading the 60 mm seat. Selection arithmetic: C 190 kN against C0 335 kN gives a C0/C ratio of 1.76, and the 39 kN fatigue load limit Pu sets the contamination-adjusted life floor. After fitting, confirm the inner ring can be pushed axially by hand through the catalogue displacement range; a ring that will not slide means the position is locked and will preload in service.
Typical equipment & failure modes
Common applications
- paper machine drying cylinders and calender rolls with long, thermally expanding shafts
- continuous-caster guide rolls and slab-caster segments under heat growth
- vibrating screen exciters fitted with the VE240 tolerance execution
- long fan and kiln main shafts where the free end must float without thrust load
Known failure patterns
- roller-end and flange smearing after lubricant starvation at the long roller contacts
- edge loading and premature spalling when the CARB position is blocked from its designed axial float
- PA66 cage (TN9) softening when the sustained temperature passes the polymer limit
- condensation pitting in machines that run intermittently in humid environments
- grease churning and overheating when a high-speed thrust position is over-packed
Selection pitfalls — read before you substitute
- At 60 mm bore the small CARB executions are unusually wide (45 mm) for their 85 mm OD — confirm the housing width before substituting a standard spherical bearing of the same bore.
- The quoted 190/335 kN ratings belong to this exact execution (C 6912-2NSV); VE240 vibrating-screen variants and sealed 2CS/2NS variants have their own figures even at the same envelope.
- Do not block the axial displacement in the drawing: housing covers, labyrinth rings and snap rings must leave the catalogue float (s) free, or the bearing silently becomes a poorly located fixed bearing.
- Never use C 6912-2NSV as the locating bearing: it carries no axial load by design — the arrangement needs a separate locating spherical, tapered or angular bearing facing the thrust.
- Tapered-bore K executions mount on adapter sleeves (1:12) and K30 on withdrawal sleeves (1:30) — the 60 mm bore changes the sleeve family, and the drive-up procedure differs accordingly.
- The 190/335 kN ratings and 830 g mass are SKF catalogue values transcribed from ch. 10.1 of PUB BU/P1 17000 (PDF table page 858); mounting data — axial displacement (s) and seating details — appears in the running text because the structured record carries the boundary envelope only.
Frequently asked questions
Is the C 6912-2NSV sealed?
Yes — this is a sealed full-complement execution (2NSV nitrile seals), greased at the factory; the catalogue lists no reference speed or limiting speed.
What fails first on a misapplied CARB bearing?
Blocking the designed axial float — clamping the free end or locating both shaft ends — turns thermal growth into edge loading and spalls the toroidal raceways. Cage damage and ordinary fatigue follow overload or dry running.
Which dimensions does the C 6912-2NSV have?
A C 6912-2NSV measures 60 mm bore × 85 mm outside diameter × 45 mm width (2.362 × 3.346 × 1.772 in). From SKF catalogue PUB BU/P1 17000: dynamic C 190 kN, static C0 335 kN, fatigue limit Pu 39 kN, no reference or limiting speeds are listed (sealed, grease-filled execution), mass about 830 g.
What does C 6912-2NSV mean in SKF part numbering?
C marks CARB; 69 the dimension series; the size code gives 60 mm bore; 2NSV is the execution (cylindrical bore for direct shaft fitting, 2NSV sealed full-complement execution). The envelope follows ISO 15 and matches spherical roller bearing outlines, but the functions differ.
Reviewed & verified by the MPN Base engineering desk against source catalog SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 10.1 CARB toroidal roller bearings on 2026-09-27. Read our editorial & correction policy.