319430-B-2LS bearing: complete specifications & equivalents
The 319430-B-2LS is a ISO 15 radial bearing sized 150 x 210 x 80 mm (bore x OD x width) with 2RS sealing. Verify dimensions against the official catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Brand | SKF |
| Bore diameter d | 150 mm |
| Outer diameter D | 210 mm |
| Width B | 80 mm |
| Material | GCr15 |
| Seal / shield | 2RS |
| Internal clearance | CN |
| Tolerance class | P0 |
| Cage | none |
| Basic dynamic load rating C | 484 kN |
| Basic static load rating C0 | 915 kN |
| Fatigue load limit Pu | 100 kN |
| Reference speed (thermal) | 600 rpm |
| Limiting speed (mechanical) | 600 rpm |
| Operating temperature | -40 to +120 °C |
| Mass | 8400 g |
| Manufacturer designation | SKF 319430 B-2LS |
| Standard | ISO 15 |
| Catalog version | SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 6.5 sealed double-row full complement cylindrical roller bearings |
| Last verified | 2026-09-26 |
Source: catalog reference (SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 6.5 sealed double-row full complement cylindrical roller bearings) · extracted 2026-09-26
Parameters extracted from the official SKF Rolling Bearings catalogue (SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 6.5 sealed double-row full complement cylindrical roller bearings); SKF® and SKF Explorer® are trademarks of AB SKF, used here for identification only — mpnbase is not an authorized SKF distributor. Boundary dimensions are ISO 15 interchangeable; current production values may differ, verify at skf.com.
Dimensions in inches & NNF4900-series range
| Bore d | 5.906 in |
|---|---|
| Outer diameter D | 8.268 in |
| Width B | 3.15 in |
| ISO bore code | 30 |
| Radial section height (D−d)/2 | 30 mm |
| Smallest bore in NNF4900-series | 130 mm |
| Largest outer diameter in NNF4900-series | 340 mm |
| Width range across NNF4900-series | 80–95 mm |
| Bore position in NNF4900-series (smallest first) | 3 of 11 |
| Bore above smallest NNF4900-series size | 20 mm |
Cross references & equivalents
No verified interchange data yet. Send an inquiry and our team will confirm equivalents manually.
How the 319430-B-2LS model number is decoded
SKF 319430 B-2LS is a sealed double-row full-complement cylindrical roller bearing sized 150×210×80 mm — a dimension series 3194, listed in SKF catalogue PUB BU/P1 17000 ch. 6.5. Structurally, the NNF design has a double-row full complement bearing with contact seals on both sides, three integral inner-ring flanges, an annular lube groove in the outer ring and additional lubrication holes in the inner ring, delivered grease-packed. In arrangement terms it is a sealed locating unit for very heavy radial loads; the sealed-for-life execution is the classic crane-sheave bearing. The B-2LS suffix denotes nitrile-rubber contact seals on both sides of a grease-packed full-complement unit. The full complement of extra rollers fitted in place of a cage is reflected in the published speeds and temperature limits. The six-digit order number is SKF's earlier designation convention retained for this 49-series envelope; it is still the factory order number rather than an NNF-series code. Load-per-bore for the 150 mm seat is about 3.23 kN/mm, typical of dimension series 3194; use C0 915 kN for static checks such as crane hook blocks standing under load. Assembly note: mount as a complete sealed unit — never wash out the factory grease; the seals set the speed ceiling, and relubrication, where specified, goes through the ring grooves. Heat steel rings inductively to max 120 °C, and never wash a full-complement unit in a way that displaces rollers.
Typical equipment & failure modes
Common applications
- large offshore hook blocks and jib sheaves
- heavy dock and shipyard crane systems
- mining dragline and shovel rope sheaves
Known failure patterns
- inner-ring raceway spalling from overload or contamination in the line-contact hertz zone
- outer-ring raceway fatigue after extended service at loads above the catalogue L10 rating
- seal-lip wear and grease loss in dusty crane and construction service after the relubrication interval is exceeded
- cage pocket wear from roller skidding at insufficient radial load or during start-up before oil film build-up
- roller-end scoring from inadequate oil flow in the roller-raceway contact
- grease degradation inside the sealed unit after long high-temperature periods, invisible until noise rises
- electrical pitting on VFD-driven shafts without grounding protection
Selection pitfalls — read before you substitute
- The sealed NNF unit is packed for life with the correct grease — do not heat it above the seal limit or wash it before mounting; damaged lip seals invalidate the heavy-load duty.
- The B1 width (79 mm inner-assembly width) differs from the overall B 80 mm; check housing and spacer geometry against both values.
- Catalogue reference and limiting speeds are different criteria, though only the limiting speed is published for this sealed unit: observe the mechanical ceiling even when thermal calculations allow more.
- Press-fit force goes through ring faces only; driving a ring home through the rollers brinells the 210 mm raceway.
- The 484/915 kN ratings are SKF catalogue 17000 (2018) values for the B-2LS execution; re-verify against the current catalogue for critical drives and keep the catalogue version with the specification.
Frequently asked questions
What are the dimensions and catalogue data of 319430-B-2LS?
SKF 319430 B-2LS is a sealed double-row full-complement cylindrical roller bearing with 150 mm bore, 210 mm OD and 80 mm width per ISO 15. SKF lists C 484 kN, C0 915 kN, Pu 100 kN, limiting speed 600 r/min (sealed execution), mass about 8400 g. Inner-assembly width B1 is 79 mm.
What does the NNF designation and B-2LS suffix mean?
The B-2LS suffix denotes nitrile-rubber contact seals on both sides of a grease-packed full-complement unit. Structurally this execution has a double-row full complement bearing with contact seals on both sides, three integral inner-ring flanges, an annular lube groove in the outer ring and additional lubrication holes in the inner ring, delivered grease-packed.
Can 319430-B-2LS take axial load and locate the shaft?
The sealed NNF unit can guide light axial loads in both directions via the flanged inner ring, but its primary duty is very heavy radial load in sealed positions.
How does 319430-B-2LS compare with the other executions in the same envelope?
The sealed NNF execution shares its envelope with the open NNCF/NNCL/NNC full-complement bearings but is delivered grease-packed with contact seals and a much lower speed ceiling.
Does the sealed NNF bearing need relubrication?
NNF bearings are delivered grease-packed and sealed for long service; where the design provides relubrication grooves/holes, replenish through them at the prescribed interval. Never wash the bearing out or exceed the seal-limited speed.
Reviewed & verified by the MPN Base engineering desk against source catalog SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 6.5 sealed double-row full complement cylindrical roller bearings on 2026-09-26. Read our editorial & correction policy.