NU31-530-ECMA-HB1 bearing: complete specifications & equivalents
The NU31-530-ECMA-HB1 is a ISO 15 radial bearing sized 530 x 870 x 272 mm (bore x OD x width). Verify dimensions against the official catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Brand | SKF |
| Bore diameter d | 530 mm |
| Outer diameter D | 870 mm |
| Width B | 272 mm |
| Material | GCr15 |
| Seal / shield | open |
| Internal clearance | CN |
| Tolerance class | P0 |
| Cage | brass |
| Basic dynamic load rating C | 7480 kN |
| Basic static load rating C0 | 14600 kN |
| Fatigue load limit Pu | 1040 kN |
| Reference speed (thermal) | 560 rpm |
| Limiting speed (mechanical) | 950 rpm |
| Operating temperature | -40 to +120 °C |
| Mass | 660000 g |
| Manufacturer designation | SKF NU 31/530 ECMA/HB1 |
| Standard | ISO 15 |
| Catalog version | SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 6.1 single-row cylindrical roller bearings |
| Last verified | 2026-09-26 |
Source: catalog reference (SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 6.1 single-row cylindrical roller bearings) · extracted 2026-09-26
Parameters extracted from the official SKF Rolling Bearings catalogue (SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 6.1 single-row cylindrical roller bearings); SKF® and SKF Explorer® are trademarks of AB SKF, used here for identification only — mpnbase is not an authorized SKF distributor. Boundary dimensions are ISO 15 interchangeable; current production values may differ, verify at skf.com.
Dimensions in inches & NU3100-series range
| Bore d | 20.866 in |
|---|---|
| Outer diameter D | 34.252 in |
| Width B | 10.709 in |
| ISO bore code | — |
| Radial section height (D−d)/2 | 170 mm |
| Smallest bore in NU3100-series | 280 mm |
| Largest outer diameter in NU3100-series | 870 mm |
| Width range across NU3100-series | 146–272 mm |
| Bore position in NU3100-series (smallest first) | 9 of 9 |
| Bore above smallest NU3100-series size | 250 mm |
Cross references & equivalents
No verified interchange data yet. Send an inquiry and our team will confirm equivalents manually.
How the NU31-530-ECMA-HB1 model number is decoded
In SKF catalogue PUB BU/P1 17000, SKF NU 31/530 ECMA/HB1 denotes a single-row caged cylindrical roller bearing on the ISO 15 530×870×272 mm envelope, dimension series 31 (compact OD, wide), with catalogue mass 660000 g. The NU configuration means two integral flanges on the outer ring and no flanges on the inner ring, so the inner ring together with the roller set is separable; functionally the bearing is non-locating: the inner ring assembly can float axially in both directions and the bearing cannot support axial load. Reading the order-string suffix ECMA/HB1: the basic execution supplied with a standard pressed-steel cage. Selection arithmetic: C0/C ≈ 1.95 (14600 against 7480 kN), and the Pu figure 1040 kN is the fatigue load-limit floor for the SKF life equation; the catalogue lists 560 r/min thermal reference speed and 950 r/min mechanical limiting speed. Assembly note: fit the inner ring and roller assembly onto the shaft and the outer ring into the housing independently; thermal expansion is absorbed by axial float, so do not trap the inner ring between shaft shoulders. Heat steel rings inductively to max 120 °C.
Typical equipment & failure modes
Common applications
- large rolling-mill drive trains
- marine propulsion line shafts
- heavy turbogenerator rotor supports
- mining hoist and winder shafts
Known failure patterns
- inner-ring raceway spalling from overload or contamination in the line-contact hertz zone
- outer-ring raceway fatigue after extended service at loads above the catalogue L10 rating
- cage pocket wear from roller skew at light load
- polymer cage cracking or softening after sustained running above 120 °C or with incompatible lubricant
- surface distress (micro-pitting) when the EHL film falls below the composite roughness at high specific load
- edge-loading fatigue after shaft deflection beyond the 3–4 minute alignment limit
- electrical pitting on VFD-driven shafts without grounding protection
Selection pitfalls — read before you substitute
- Do not use a NU bearing where axial load must be carried — the design carries radial load only
- The dimension series 31 (compact OD, wide) envelope is shared with the N/NU/NJ/NUP executions of 31/530, but flange configuration and axial-locating behaviour differ — quote the full SKF NU 31/530 ECMA/HB1 and do not substitute rib styles without checking the shaft locating scheme.
- Press-fit force goes through ring faces only; driving a ring home through the rollers brinells the 870 mm raceway.
- Shaft and housing fillets must clear the bearing chamfers; an oversized radius tilts the 272 mm-wide ring and concentrates load.
- The 7480/14600 kN ratings are SKF catalogue 17000 (2018) values for the ECMA/HB1 execution; re-verify against the current catalogue for critical drives and keep the catalogue version with the specification.
Frequently asked questions
What are the dimensions and catalogue data of NU31-530-ECMA-HB1?
SKF NU 31/530 ECMA/HB1 is a single-row caged cylindrical roller bearing with 530 mm bore, 870 mm OD and 272 mm width per ISO 15. SKF lists C 7480 kN, C0 14600 kN, Pu 1040 kN, reference speed 560 r/min and limiting speed 950 r/min, mass about 660000 g.
What does the NU designation and ECMA/HB1 suffix mean?
The plain designation (no cage suffix) identifies the basic execution supplied with a standard pressed-steel cage. Structurally this execution has two integral flanges on the outer ring and no flanges on the inner ring, so the inner ring together with the roller set is separable.
Can NU31-530-ECMA-HB1 take axial load and locate the shaft?
No — the inner ring has no flanges, so the NU bearing is non-locating and carries radial load only; use NJ (one direction), NUP (both directions) or a paired thrust bearing for axial duty.
How does NU31-530-ECMA-HB1 compare with the other executions in the same envelope?
The N/NU/NJ/NUP executions share the ISO 15 envelope and load ratings but differ in flange arrangement and axial-locating behaviour; quote the exact order number.
What limits the service life of this bearing most often?
Line-contact fatigue above the L10 rating, cage wear at light loads and high temperatures, and edge loading from misalignment beyond about 3–4 minutes of arc are the typical failure drivers.
Reviewed & verified by the MPN Base engineering desk against source catalog SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 6.1 single-row cylindrical roller bearings on 2026-09-26. Read our editorial & correction policy.