NA6908 bearing: complete specifications & equivalents
The NA6908 is a ISO 1206 radial bearing sized 40 x 62 x 40 mm (bore x OD x width). Verify dimensions against the official catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Brand | SKF |
| Bore diameter d | 40 mm |
| Outer diameter D | 62 mm |
| Width B | 40 mm |
| Material | GCr15 |
| Seal / shield | open |
| Internal clearance | CN |
| Tolerance class | P0 |
| Cage | none |
| Basic dynamic load rating C | 67.1 kN |
| Basic static load rating C0 | 125 kN |
| Fatigue load limit Pu | 15.3 kN |
| Reference speed (thermal) | 8000 rpm |
| Limiting speed (mechanical) | 9500 rpm |
| Operating temperature | -40 to +120 °C |
| Mass | 430 g |
| Manufacturer designation | NA 6908 |
| Standard | ISO 1206 |
| Catalog version | SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 7.4 machined rings with flanges, with an inner ring |
| Last verified | 2026-09-26 |
Source: catalog reference (SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 7.4 machined rings with flanges, with an inner ring) · extracted 2026-09-26
Parameters extracted from the official SKF Rolling Bearings catalogue (SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 7.4 machined rings with flanges, with an inner ring); SKF® and SKF Explorer® are trademarks of AB SKF, used here for identification only — mpnbase is not an authorized SKF distributor. Boundary dimensions are ISO 15 interchangeable; current production values may differ, verify at skf.com.
Dimensions in inches & NA-69-series range
| Bore d | 1.575 in |
|---|---|
| Outer diameter D | 2.441 in |
| Width B | 1.575 in |
| ISO bore code | 08 |
| Radial section height (D−d)/2 | 11 mm |
| Smallest bore in NA-69-series | 12 mm |
| Largest outer diameter in NA-69-series | 130 mm |
| Width range across NA-69-series | 22–63 mm |
| Bore position in NA-69-series (smallest first) | 11 of 22 |
| Bore above smallest NA-69-series size | 28 mm |
Cross references & equivalents
No verified interchange data yet. Send an inquiry and our team will confirm equivalents manually.
How the NA6908 model number is decoded
NA 6908 is a machined-ring needle roller bearing with an inner ring: flanged outer ring plus a separate 40 mm bore inner ring, so the shaft seat needs only ordinary tolerance, as tabulated by SKF in SKF catalogue PUB BU/P1 17000. The NA 6908 code gives bore 40 mm and width 40 mm explicitly; unlike the RNA/NK families the shaft only needs a standard k5/j5 seat because the hardened inner ring is the raceway. Inner rings are separable: order replacement inner rings separately by d×D×B, since the outer ring and roller assembly survive journals that ruin an inner raceway. Minimum load matters: below roughly 0.02·C the rollers skid and smear; preloading the pivot or specifying a heavier execution avoids the glazing that pure oscillation produces on these raceways. Because the inner ring is separable, mount it first against its shoulder, then slide the outer ring and roller set over it — the order avoids forcing rollers across the shaft threads or burrs.
Typical equipment & failure modes
Common applications
- electric motor armature shafts with ground seats
- printing and paper-handling rollers
- gearbox shafts where the journal cannot be hardened on site
- wheel and lever pivots needing a replaceable inner ring
Known failure patterns
- raceway spalling once the catalogue L10 life is exceeded or after overload events
- cage pocket wear and roller skew after sustained operation with too little radial preload
- grease starvation at the roller ends when relubrication intervals are stretched in dirty duty
- false brinelling of standby equipment under external vibration
- inner-ring bore fretting on a loose shaft seat, migrating hard particles into the rolling contact
Selection pitfalls — read before you substitute
- At 40 mm bore, verify shaft deflection against the needle length: these rollers tolerate little edge loading, and a simply supported span between 40 mm seats can bend past the compensation range long before the load rating is exhausted.
- Do not interchange envelope-identical needle families blindly: NA 6908 shares its 40×62×40 mm outline with inner-ring and sealed siblings whose ratings differ — the family letters are part of the specification, not decoration.
- Reference and limiting speeds are different limits: the 8,000 r/min reference is the thermal criterion under load, The limiting value is mechanical; the reference value is thermal under load, and grease choice moves it substantially.
- The 67.1/125 kN ratings and 430 g mass are SKF catalogue values transcribed from ch. 7.4 of PUB BU/P1 17000 (PDF table page 642); combined-type axial ratings appear in the text above because the structured record carries radial values only.
Frequently asked questions
How should the NA 6908 be mounted?
Mount the inner ring on the 40 mm seat first (induction heat, max 120 °C, or press), then fit the flanged outer ring into the H7 housing bore. Verify free rotation and, for 2RS executions, check the wider outer ring against the housing depth.
What limits the service life of a NA 6908?
Beyond the L10 rating, the practical limits are journal/raceway hardness for the 40 mm seat, lubricant condition at the roller ends, and contamination through open ends — the 11.0 mm radial section leaves no reserve once a raceway is dented or ribboned.
What are the dimensions and ratings of the NA 6908?
A NA 6908 measures 40 mm bore/Fw × 62 mm outside diameter × 40 mm width (1.575 × 2.441 × 1.575 in). From SKF catalogue PUB BU/P1 17000: radial dynamic rating C 67.1 kN, static C0 125 kN, fatigue limit Pu 15.3 kN, limiting speed 9,500 r/min, reference speed 8,000 r/min, mass about 430 g.
How is the NA 6908 designation read?
The letters mark a machined-ring needle roller bearing with inner ring: 40 mm bore, 40 mm width, 62 mm OD per the series plan. The hardened inner ring is the raceway, so an ordinary k5 shaft seat suffices.
Reviewed & verified by the MPN Base engineering desk against source catalog SKF PUB BU/P1 17000/1 EN (Oct 2018), ch. 7.4 machined rings with flanges, with an inner ring on 2026-09-26. Read our editorial & correction policy.