MPNbase

710 mm bore bearings

20 models with a 710 mm (27.953 in) bore across 4 bearing types, outside diameters from 870 to 1220 mm. Tables are grouped by type; open a model for full specs and equivalents.

20 models 870–1220 mm OD range 1 brand

CARB Toroidal Roller Bearings (8)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
C39-710-KM C3900 710 950 180 SKF open CN 6000
C39-710-M C3900 710 950 180 SKF open CN 6000
C30-710-KM C3000 710 1030 236 SKF open CN 8800
C30-710-M C3000 710 1030 236 SKF open CN 8800
C40-710-K30M C4000 710 1030 315 SKF open CN 10600
C40-710-M C4000 710 1030 315 SKF open CN 10600
C31-710-KMB C3100 710 1150 345 SKF open CN 13400
C31-710-MB C3100 710 1150 345 SKF open CN 13400

Cylindrical Roller Bearings (7)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
NCF18-710-V NCF1800 710 870 74 SKF open CN 1540
NCF28-710-V NCF2800 710 870 95 SKF open CN 2330
NJ28-710-ECMA NJ2800 710 870 95 SKF open CN 1940
NCF29-710-V NCF2900 710 950 140 SKF open CN 4290
NU29-710-ECMA NU2900 710 950 140 SKF open CN 3740
NU10-710-ECMA NU1000 710 1030 140 SKF open CN 4680
NU20-710-ECMA-HB1 NU2000 710 1030 185 SKF open CN 5940

Deep Groove Ball Bearings (3)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
618-710-MA 61800 710 870 74 SKF open CN 475
619-710-MA 61900 710 950 106 SKF open CN 663
60-710-MA 6000 710 1030 140 SKF open CN 956

Spherical Roller Thrust Bearings (2)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
293-710-EM 29300 710 1060 212 SKF open CN 9950
294-710-EF 29400 710 1220 308 SKF open CN 17600

Selecting a 710 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 710 mm the catalog spans 870–1220 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a m6 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 710 mm bore?

This index lists 20 verified bearing models with a 710 mm (27.953 in) bore across 4 bearing types, from 870 to 1220 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 870–1220 mm OD options for a 710 mm shaft?

On a fixed 710 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 710 mm bearings?

A 710 mm bore on a rotating inner ring normally uses a m6 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). In the ISO designation system 710 mm is bore code 142 (code × 5), so a 62-series bearing with this bore is the 62142.