7216-NTN bearing: complete specifications & equivalents
The 7216-NTN is a ISO 15 radial bearing sized 80 x 140 x 26 mm (bore x OD x width). Verify dimensions against the official catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Brand | NTN |
| Bore diameter d | 80 mm |
| Outer diameter D | 140 mm |
| Width B | 26 mm |
| Material | GCr15 |
| Seal / shield | open |
| Internal clearance | CN |
| Tolerance class | P0 |
| Cage | steel, stamped ribbon (J-type) |
| Basic dynamic load rating C | 98.5 kN |
| Basic static load rating C0 | 76 kN |
| Fatigue load limit Pu | 5.65 kN |
| Limiting speed (mechanical) | 5000 rpm |
| Operating temperature | -40 to +120 °C |
| Mass | 1390 g |
| Manufacturer designation | NTN 7216 |
| Standard | ISO 15 |
| Catalog version | NTN Ball and Roller Bearings CAT.No.2203E |
| Last verified | 2026-10-01 |
Source: catalog reference (NTN Ball and Roller Bearings CAT.No.2203E) · extracted 2026-10-01
Parameters extracted from the official NTN Ball and Roller Bearings catalogue (NTN Ball and Roller Bearings CAT.No.2203E); NTN® is a trademark of NTN Corporation, used here for identification only — mpnbase is not an authorized NTN distributor. Boundary dimensions are ISO 15 interchangeable; current production values may differ, verify at ntnglobal.com.
Dimensions in inches & 7200-series range
| Bore d | 3.15 in |
|---|---|
| Outer diameter D | 5.512 in |
| Width B | 1.024 in |
| ISO bore code | 16 |
| Radial section height (D−d)/2 | 30 mm |
| Smallest bore in 7200-series | 10 mm |
| Largest outer diameter in 7200-series | 540 mm |
| Width range across 7200-series | 9–85 mm |
| Bore position in 7200-series (smallest first) | 17 of 36 |
| Bore above smallest 7200-series size | 70 mm |
Cross references & equivalents
No verified interchange data yet. Send an inquiry and our team will confirm equivalents manually.
How the 7216-NTN model number is decoded
7216 is the 80 mm bore member of NTN's medium-duty 7200 single-row family, with a 140 mm outside diameter and 26 mm section width. Two fields make up the code — 72 is the single-row dimension series (medium-duty 7200 single-row family) and 16 encodes the 80 mm bore (bore code x 5); with no letter after the digits it is the standard 30 deg contact-angle execution — the 40 deg version carries a B. The static margin, C0 76 kN versus C 98.5 kN, is what supports slow oscillating duty and shock without immediate brinelling. The 80/140/26 envelope is an ISO 15 boundary plan, so dimensional interchange with other makers holds — ratings and internal geometry do not automatically follow. Shaft and housing shoulders must clear the ring corners yet support enough face — the catalogue abutment diameters for the 80 mm bore give the working limits.
Typical equipment & failure modes
Common applications
- large pump, fan and compressor rotor shafts
- crane and hoist gearbox shafts
- paper-machine roll and calendar drives
- extruder and mixer gearbox output shafts
Known failure patterns
- false brinelling on the raceway contact ellipses when a preloaded spindle sits vibrating at standstill — visible as evenly spaced flute-like wear at ball pitch
- loss of preload after housing-fret or shaft creep, leaving the pair loose — ball skidding, cage rattle and a falling natural frequency follow
- pressed-steel cage pocket wear and rivet loosening after repeated ball skid at light load and high speed
- current-erosion pitting on VFD-driven motor shafts, first visible as a grey frosted band across both raceways
- contamination-induced denting — hard particles rolled into the contact ellipse become the initiation points for surface fatigue
Selection pitfalls — read before you substitute
- Bearings of 80 mm bore arrive heavy enough that handling damage (dents from slings, tilting on the shaft) is a real failure precursor — use proper lifting and heating kit.
- The standard 30 deg bearing and its B (40 deg) sibling share the envelope; picking between them is a load-direction decision, not a quality upgrade.
- On a 80 mm shaft, an interference fit eats internal clearance; skipping the clearance/preload recalculation is the classic cause of a new bearing running 20 deg C hotter than the drawing suggests.
- On a 80 mm shaft, an interference fit eats internal clearance; skipping the clearance/preload recalculation is the classic cause of a new bearing running 20 deg C hotter than the drawing suggests.
- Do not pair two random 7216 bearings from stock and expect catalogue paired ratings — matched-set grinding is what makes DB/DF/DT preload behave, and NTN sells those as separate order numbers.
- The 98.5/76 kN ratings and 5.65 kN Pu here are NTN Ball and Roller Bearings CAT.No.2203E figures for 7216; internal geometry legitimately differs between manufacturers, so re-verify ratings, contact angle and suffix before substituting another make on a rated drive.
Frequently asked questions
What are the dimensions and catalogue ratings of NTN 7216?
7216 is a single-row angular contact ball bearing to ISO 15: 80 mm bore, 140 mm outside diameter, 26 mm width (3.15 x 5.512 x 1.024 in). From NTN Ball and Roller Bearings CAT.No.2203E: C 98.5 kN, C0 76 kN and a 5.65 kN fatigue load limit Pu; the grease limiting speed is 5,000 r/min and the oil rating 6,600 r/min; mass about 1390 g.
How is the 7216 designation structured?
72 is the single-row dimension series (medium-duty 7200 single-row family); 16 encodes the 80 mm bore (bore code x 5); with no letter after the digits it is the standard 30 deg contact-angle execution — the 40 deg version carries a B. The 140 mm OD and 26 mm width follow the ISO 15 boundary-dimension plan for that series.
Which axial direction does 7216 support?
One 7216 alone takes thrust in one direction only, along its 30 deg contact angle; reversing thrust calls for a second bearing or a factory-matched DB/DF/DT pair (the catalogue right-hand columns list the paired ratings). Radial load is always carried as a combined load through the angled contact.
What lubrication speeds does NTN print for 7216?
Per NTN Ball and Roller Bearings CAT.No.2203E, the grease limiting speed is 5,000 r/min and the oil rating 6,600 r/min. These are catalogue ceilings for a correctly mounted bearing with the stated lubricant; preload, fill quantity, ambient heat and paired arrangements all move the real limit.
What should be checked before substituting another make for 7216?
The 80/140/26 mm envelope is ISO 15 interchangeable, but internal geometry — contact angle, osculation, cage and shoulder details — is maker-specific. Re-verify C 98.5 kN / C0 76 kN, the speed figures, contact angle and suffix meaning against the donor catalogue before swapping on a rated drive.
Reviewed & verified by the MPN Base engineering desk against source catalog NTN Ball and Roller Bearings CAT.No.2203E on 2026-10-01. Read our editorial & correction policy.