190×290×75 mm bearings
14 models from 3 brands across 4 types share this ISO 15 envelope: 190 mm bore, 290 mm outside diameter, 75 mm width (7.480×11.417×2.953 in), 50 mm radial section.
14 models fit this space 3 brands 14 with catalogue C rating
Dimensional interchange — verify before substituting
These bearings are interchangeable on boundary dimensions per ISO 15 — same bore, OD and width. They are not guaranteed drop-in equivalents: compare load ratings, seals, clearance, cage, precision and axial-locating design for the specific duty. Models without a catalogue C rating on this site carry ISO 15 geometry only; request the manufacturer table before a load-critical replacement.
| Model | Type | Brand | Seal | Clearance | C (kN) | C0 (kN) | Mass (g) |
|---|---|---|---|---|---|---|---|
| 23038 | Spherical Roller | SKF | open | CN | 916 | 1340 | 18000 |
| 23038-CCK-W33 | Spherical Roller | SKF | open | CN | 916 | 1340 | 25000 |
| 23038EAD1 | Spherical Roller | NTN | open | CN | 1140 | 1570 | 17800 |
| 23038EAKD1 | Spherical Roller | NTN | open | CN | 1140 | 1570 | 17300 |
| 23038EMD1 | Spherical Roller | NTN | open | CN | 1140 | 1570 | 17900 |
| 23038EMKD1 | Spherical Roller | NTN | open | CN | 1140 | 1570 | 17400 |
| 323038UTG | Tapered Roller | NTN | open | CN | 790 | 1110 | 17900 |
| 413038UTG | Tapered Roller | NTN | open | CN | 555 | 740 | 15900 |
| C3038 | CARB Toroidal Roller | SKF | open | CN | 930 | 1460 | 17500 |
| C3038-K | CARB Toroidal Roller | SKF | open | CN | 930 | 1460 | 17500 |
| NCF3038-CV | Cylindrical Roller | SKF | open | CN | 792 | 1290 | 17000 |
| NN3038 | Cylindrical Roller | NTN | open | CN | 640 | 1040 | 18000 |
| NN3038K | Cylindrical Roller | NTN | open | CN | 640 | 1040 | 17400 |
| SL183038 | Cylindrical Roller | FAG | open | CN | 830 | 1300 | 17000 |
Substitution verification checklist
- Load rating. Check C (dynamic) and C0 (static) against the original life calculation — the table above shows which models carry verified catalogue values.
- Sealing. Open, -ZZ shields and -2RS contact seals are not equivalent in friction, speed or contamination protection; match the housing environment, not just the suffix on the old box.
- Internal clearance. CN/C3/C4 changes with fit and operating temperature; an interference inner-ring mount commonly needs C3 where the bench bearing ran CN.
- Cage and precision. Stamped steel, machined brass and polymer cages, and P0/P6/P5 tolerance classes, carry different speed and shock limits.
- Locating behaviour. Within one envelope an NU cylindrical roller floats axially while an NJ/NUP locates; ball designs take thrust that roller locating schemes do not. Preserve the shaft's locating arrangement.
Browse all 190 mm bore bearings for wider or narrower sections, or open a model page for naming-rule decode, applications and graded cross references: 23038, 23038-CCK-W33, 23038EAD1, 23038EAKD1, 23038EMD1, 23038EMKD1, 323038UTG, 413038UTG, C3038, C3038-K, NCF3038-CV, NN3038, NN3038K, SL183038.
Frequently asked questions
Are all 190×290×75 mm bearings interchangeable?
They share the same ISO 15 boundary dimensions — 190 mm bore, 290 mm OD, 75 mm width (7.480×11.417×2.953 in) — so they fit the same shaft, housing bore and axial space. Interchangeability ends at the envelope: dynamic load rating, seal arrangement, internal clearance, cage and precision class differ between the 14 models listed here and must be checked against the duty before substitution.
Is it a drop-in replacement if two bearings both measure 190×290×75?
Only after verification. Confirm five things in order: (1) the C/C0 load ratings meet the original life calculation, (2) the seal type is equivalent or acceptable for the contamination level (open vs -ZZ vs -2RS), (3) internal clearance matches (CN/C3/C4 — an interference fit changes residual play), (4) cage material and precision class suit the speed, and (5) the axial-locating behaviour is the same (for example an NU cylindrical roller floats while an NJ locates one way). Same dimensions alone never guarantee equal performance.
What is 190×290×75 mm in inches?
190×290×75 mm converts to 7.480×11.417×2.953 in, with a 50 mm (1.969 in) radial section height. These are the ISO 15 general-plan envelope dimensions shared across manufacturers, which is why models such as 23038, 23038-CCK-W33, 23038EAD1 mount in the same space despite different internal designs.