30.162499999999998 mm bore bearings
11 models with a 30.162499999999998 mm (1.188 in) bore across 1 bearing type, outside diameters from 62 to 62 mm. Tables are grouped by type; open a model for full specs and equivalents.
11 models 62–62 mm OD range 1 brand
| Model | Series | d (mm) | D (mm) | B (mm) | Brand | Seal | Clearance | C (kN) |
|---|---|---|---|---|---|---|---|---|
| YET-206-103 | YEL2 | 30.162499999999998 | 62 | 23.8 | SKF | open | CN | 19.5 |
| YAT-206-103 | YAR2 | 30.162499999999998 | 62 | 30.2 | SKF | open | CN | 19.5 |
| YEL-206-103-2F | YEL2 | 30.162499999999998 | 62 | 36.5 | SKF | 2RS | CN | 19.5 |
| YELAG-206-103 | YEL2 | 30.162499999999998 | 62 | 36.5 | SKF | 2RS | CN | 19.5 |
| YSP-206-103-SB-2F | YSP2 | 30.162499999999998 | 62 | 37.2 | SKF | 2RS | CN | 19.5 |
| YSPAG-206-103 | YSP2 | 30.162499999999998 | 62 | 37.2 | SKF | 2RS | CN | 19.5 |
| YAR-206-103-2F | YAR2 | 30.162499999999998 | 62 | 38.1 | SKF | 2RS | CN | 19.5 |
| YAR-206-103-2RF-HV | YAR2 | 30.162499999999998 | 62 | 38.1 | SKF | 2RS | CN | 16.3 |
| YAR-206-103-2RF-VE495 | YAR2 | 30.162499999999998 | 62 | 38.1 | SKF | 2RS | CN | 19.5 |
| YAR-206-103-2RFGR-HV | YAR2 | 30.162499999999998 | 62 | 38.1 | SKF | 2RS | CN | 16.3 |
| YARAG-206-103 | YAR2 | 30.162499999999998 | 62 | 38.1 | SKF | 2RS | CN | 19.5 |
Exact-dimension interchange groups at 30.162499999999998 mm bore
These d×D×B envelopes at a 30.162499999999998 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:
Selecting a 30.162499999999998 mm bore bearing
The bore fixes the shaft, not the bearing capacity. At 30.162499999999998 mm the catalog spans 62–62 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.
For a rotating inner ring a k5 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.
Frequently asked questions
What bearings have a 30.162499999999998 mm bore?
This index lists 11 verified bearing models with a 30.162499999999998 mm (1.188 in) bore across 1 bearing type, from 62 to 62 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.
How do I choose between the 62–62 mm OD options for a 30.162499999999998 mm shaft?
On a fixed 30.162499999999998 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.
What shaft fit and bore code apply to 30.162499999999998 mm bearings?
A 30.162499999999998 mm bore on a rotating inner ring normally uses a k5 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). Bore diameters below 20 mm follow the 10/12/15/17 mm exception table rather than code × 5.