MPNbase

41.275 mm bore bearings

32 models with a 41.275 mm (1.625 in) bore across 2 bearing types, outside diameters from 73.025 to 101.6 mm. Tables are grouped by type; open a model for full specs and equivalents.

32 models 73.025–101.6 mm OD range 2 brands

Insert Bearings (Y-bearings) (2)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
YAR-209-110-2F YAR2 41.275 85 49.2 SKF 2RS CN 33.2
YARAG-209-110 YAR2 41.275 85 49.2 SKF 2RS CN 33.2

Tapered Roller Bearings (30)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
18590-18520 18500 41.275 73.025 16.667 SKF open CN 57.7
18590-18520-NTN 4t-inch 41.275 73.025 16.667 NTN open CN 51
LM501349-310 LM501300 41.275 73.431 19.558 SKF open CN 67.6
LM501349-LM501310 4t-inch 41.275 73.431 19.558 NTN open CN 62
LM501349-314 LM501300 41.275 73.431 21.43 SKF open CN 67.6
LM501349-LM501314 4t-inch 41.275 73.431 21.43 NTN open CN 62
11162-11300 11000 41.275 76.2 18.009 SKF open CN 55.7
11162-11300-NTN 4t-inch 41.275 76.2 18.009 NTN open CN 47
11163-11300 11000 41.275 76.2 18.009 SKF open CN 55.7
24780-24720 24700 41.275 76.2 22.225 SKF open CN 84.2
24780-24720-NTN 4t-inch 41.275 76.2 22.225 NTN open CN 72
26882-26823 4t-inch 41.275 76.2 25.4 NTN open CN 85
26882-26824 4t-inch 41.275 79.378 23.812 NTN open CN 85
26885-26822 4t-inch 41.275 79.378 23.812 NTN open CN 85
11162-11315 4t-inch 41.275 80 18.009 NTN open CN 47
336-332 4t-inch 41.275 80 21 NTN open CN 75.5
M802048-011 M802000 41.275 82.55 26.543 SKF open CN 91.2
M802048-M802011 4t-inch 41.275 82.55 26.543 NTN open CN 89
3880-3820 4t-inch 41.275 85.725 30.162 NTN open CN 116
3576-3525 4t-inch 41.275 87.312 30.162 NTN open CN 104
3585-3525 3500 41.275 87.312 30.162 SKF open CN 126
HM803145-HM803110 4t-inch 41.275 88.9 30.162 NTN open CN 104
HM803146-110 HM803100 41.275 88.9 30.162 SKF open CN 116
4388-4335 4t-inch 41.275 90.488 39.688 NTN open CN 151
M903345-M903310 4t-inch 41.275 92.075 26.195 NTN open CN 80.5
46162-46368 4t-inch 41.275 93.662 31.75 NTN open CN 115
HM804840-HM804810 4t-inch 41.275 95.25 30.162 NTN open CN 120
53162-53375 4t-inch 41.275 95.25 30.958 NTN open CN 91.5
HM903245-HM903210 4t-inch 41.275 95.25 30.958 NTN open CN 107
526-522 525 41.275 101.6 34.925 SKF open CN 184

Exact-dimension interchange groups at 41.275 mm bore

These d×D×B envelopes at a 41.275 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:

Selecting a 41.275 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 41.275 mm the catalog spans 73.025–101.6 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a k5 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 41.275 mm bore?

This index lists 32 verified bearing models with a 41.275 mm (1.625 in) bore across 2 bearing types, from 73.025 to 101.6 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 73.025–101.6 mm OD options for a 41.275 mm shaft?

On a fixed 41.275 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 41.275 mm bearings?

A 41.275 mm bore on a rotating inner ring normally uses a k5 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). Bore diameters below 20 mm follow the 10/12/15/17 mm exception table rather than code × 5.