10×35×11 mm bearings
22 models from 5 brands across 3 types share this ISO 15 envelope: 10 mm bore, 35 mm outside diameter, 11 mm width (0.394×1.378×0.433 in), 12.5 mm radial section.
22 models fit this space 5 brands 21 with catalogue C rating
Dimensional interchange — verify before substituting
These bearings are interchangeable on boundary dimensions per ISO 15 — same bore, OD and width. They are not guaranteed drop-in equivalents: compare load ratings, seals, clearance, cage, precision and axial-locating design for the specific duty. Models without a catalogue C rating on this site carry ISO 15 geometry only; request the manufacturer table before a load-critical replacement.
| Model | Type | Brand | Seal | Clearance | C (kN) | C0 (kN) | Mass (g) |
|---|---|---|---|---|---|---|---|
| 1300 | Self-Aligning Ball | NTN | open | — | 7.35 | 1.62 | 59 |
| 6300 | Deep Groove Ball | SKF | open | CN | 8.52 | 3.4 | 53 |
| 6300-2RS | Deep Groove Ball | SKF | 2RS | CN | 8.52 | 3.4 | 54 |
| 6300-2RS-FAG | Deep Groove Ball | FAG | 2RS | CN | 8.6 | 3.45 | 57 |
| 6300-2RS-NSK | Deep Groove Ball | NSK | 2RS | CN | 8.9 | 3.45 | 52 |
| 6300-2RS-NTN | Deep Groove Ball | NTN | 2RS | CN | 9.1 | 3.5 | 53 |
| 6300-FAG | Deep Groove Ball | FAG | open | CN | 8.6 | 3.45 | 53 |
| 6300-NSK | Deep Groove Ball | NSK | open | CN | 8.9 | 3.45 | 52 |
| 6300-NTN | Deep Groove Ball | NTN | open | CN | 9.1 | 3.5 | 53 |
| 6300-RSR | Deep Groove Ball | SKF | RSR | CN | 8.52 | 3.4 | 53 |
| 6300-RSR-NSK | Deep Groove Ball | NSK | RSR | CN | 8.9 | 3.45 | 52 |
| 6300-RSR-NTN | Deep Groove Ball | NTN | RSR | CN | 9.1 | 3.5 | 53 |
| 6300-ZZ | Deep Groove Ball | SKF | ZZ | CN | 8.52 | 3.4 | 55 |
| 6300-ZZ-FAG | Deep Groove Ball | FAG | ZZ | CN | 8.6 | 3.45 | 54 |
| 6300-ZZ-NSK | Deep Groove Ball | NSK | ZZ | CN | 8.9 | 3.45 | 52 |
| 6300-ZZ-NTN | Deep Groove Ball | NTN | ZZ | CN | 9.1 | 3.5 | 53 |
| 7300 | Angular Contact Ball | GENERIC-ISO | open | CN | — | — | 50 |
| 7300-NTN | Angular Contact Ball | NTN | open | CN | 11.2 | 4.95 | 40 |
| 7300B | Angular Contact Ball | NTN | open | CN | 10.5 | 4.6 | 41 |
| W6300 | Deep Groove Ball | SKF | open | CN | 7.02 | 3.4 | 50 |
| W6300-2RS | Deep Groove Ball | SKF | 2RS | CN | 7.02 | 3.4 | 52 |
| W6300-ZZ | Deep Groove Ball | SKF | ZZ | CN | 7.02 | 3.4 | 53 |
Substitution verification checklist
- Load rating. Check C (dynamic) and C0 (static) against the original life calculation — the table above shows which models carry verified catalogue values.
- Sealing. Open, -ZZ shields and -2RS contact seals are not equivalent in friction, speed or contamination protection; match the housing environment, not just the suffix on the old box.
- Internal clearance. CN/C3/C4 changes with fit and operating temperature; an interference inner-ring mount commonly needs C3 where the bench bearing ran CN.
- Cage and precision. Stamped steel, machined brass and polymer cages, and P0/P6/P5 tolerance classes, carry different speed and shock limits.
- Locating behaviour. Within one envelope an NU cylindrical roller floats axially while an NJ/NUP locates; ball designs take thrust that roller locating schemes do not. Preserve the shaft's locating arrangement.
Browse all 10 mm bore bearings for wider or narrower sections, or open a model page for naming-rule decode, applications and graded cross references: 1300, 6300, 6300-2RS, 6300-2RS-FAG, 6300-2RS-NSK, 6300-2RS-NTN, 6300-FAG, 6300-NSK, 6300-NTN, 6300-RSR, 6300-RSR-NSK, 6300-RSR-NTN, 6300-ZZ, 6300-ZZ-FAG, 6300-ZZ-NSK, 6300-ZZ-NTN, 7300, 7300-NTN, 7300B, W6300, W6300-2RS, W6300-ZZ.
Frequently asked questions
Are all 10×35×11 mm bearings interchangeable?
They share the same ISO 15 boundary dimensions — 10 mm bore, 35 mm OD, 11 mm width (0.394×1.378×0.433 in) — so they fit the same shaft, housing bore and axial space. Interchangeability ends at the envelope: dynamic load rating, seal arrangement, internal clearance, cage and precision class differ between the 22 models listed here and must be checked against the duty before substitution.
Is it a drop-in replacement if two bearings both measure 10×35×11?
Only after verification. Confirm five things in order: (1) the C/C0 load ratings meet the original life calculation, (2) the seal type is equivalent or acceptable for the contamination level (open vs -ZZ vs -2RS), (3) internal clearance matches (CN/C3/C4 — an interference fit changes residual play), (4) cage material and precision class suit the speed, and (5) the axial-locating behaviour is the same (for example an NU cylindrical roller floats while an NJ locates one way). Same dimensions alone never guarantee equal performance.
What is 10×35×11 mm in inches?
10×35×11 mm converts to 0.394×1.378×0.433 in, with a 12.5 mm (0.492 in) radial section height. These are the ISO 15 general-plan envelope dimensions shared across manufacturers, which is why models such as 1300, 6300, 6300-2RS mount in the same space despite different internal designs.