MPNbase

10 mm bore bearings

35 models with a 10 mm (0.394 in) bore across 5 bearing types, outside diameters from 14 to 40 mm. Tables are grouped by type; open a model for full specs and equivalents.

35 models 14–40 mm OD range 4 brands

Angular Contact Ball Bearings (3)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
7000 7000 10 26 8 GENERIC-ISO open CN —
7200 7200 10 30 9 GENERIC-ISO open CN —
7300 7300 10 35 11 GENERIC-ISO open CN —

Deep Groove Ball Bearings (23)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
61800 61800 10 19 5 SKF open CN 1.72
61800-2RS 61800 10 19 5 SKF 2RS CN 1.72
61800-RSR 61800 10 19 5 NSK RSR CN 1.89
61800-ZZ 61800 10 19 5 SKF ZZ CN 1.72
61900 61900 10 22 6 SKF open CN 2.7
61900-2RS 61900 10 22 6 SKF 2RS CN 2.7
61900-RSR 61900 10 22 6 NSK RSR CN 2.97
61900-ZZ 61900 10 22 6 SKF ZZ CN 2.7
6000 6000 10 26 8 SKF open CN 4.75
6000-2RS 6000 10 26 8 SKF 2RS CN 4.75
6000-RSR 6000 10 26 8 SKF RSR CN 4.75
6000-ZZ 6000 10 26 8 SKF ZZ CN 4.75
6200 6200 10 30 9 SKF open CN 5.4
6200-2RS 6200 10 30 9 SKF 2RS CN 5.4
6200-RSR 6200 10 30 9 SKF RSR CN 5.4
6200-ZZ 6200 10 30 9 SKF ZZ CN 5.4
6300 6300 10 35 11 SKF open CN 8.52
6300-2RS 6300 10 35 11 SKF 2RS CN 8.52
6300-RSR 6300 10 35 11 SKF RSR CN 8.52
6300-ZZ 6300 10 35 11 SKF ZZ CN 8.52
6400 6400 10 40 12 GENERIC-ISO open CN —
6400-2RS 6400 10 40 12 GENERIC-ISO 2RS CN —
6400-ZZ 6400 10 40 12 GENERIC-ISO ZZ CN —

Needle Roller Bearings (3)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
HK1010FM HK 10 14 10 NTN open — 4.5
HK1012F HK 10 14 12 NTN open — 5.65
HK1015F HK 10 14 15 NTN open — 7.25

Self-Aligning Ball Bearings (4)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
1200 1200 10 30 9 NTN open — 5.55
2200 2200 10 30 14 NTN open — 7.45
1300 1300 10 35 11 NTN open — 7.35
2300 2300 10 35 17 NTN open — 9.2

Thrust Ball Bearings (2)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
51100 51100 10 24 9 NTN open — 10
51200 51200 10 26 11 NTN open — 12.7

Exact-dimension interchange groups at 10 mm bore

These d×D×B envelopes at a 10 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:

Selecting a 10 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 10 mm the catalog spans 14–40 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a j5 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 10 mm bore?

This index lists 35 verified bearing models with a 10 mm (0.394 in) bore across 5 bearing types, from 14 to 40 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 14–40 mm OD options for a 10 mm shaft?

On a fixed 10 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 10 mm bearings?

A 10 mm bore on a rotating inner ring normally uses a j5 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). Bore diameters below 20 mm follow the 10/12/15/17 mm exception table rather than code × 5.