MPNbase

24 mm bore bearings

32 models with a 24 mm (0.945 in) bore across 3 bearing types, outside diameters from 32 to 72 mm. Tables are grouped by type; open a model for full specs and equivalents.

32 models 32–72 mm OD range 2 brands

Cam Followers (18)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
KRE-47-PPA KR 24 47 66 SKF open CN 14.7
NUKRE-47-A NUKR 24 47 66 SKF open CN 28.6
KRE-52-PPA KR 24 52 66 SKF open CN 15.7
NUKRE-52-A NUKR 24 52 66 SKF open CN 29.7
KR-62-PPA KR 24 62 80 SKF open CN 24.6
KR62-PP kr 24 62 80 FAG 2RS CN 26
KRE62-PP kre 24 62 80 FAG 2RS CN 26
KRV-62-PPA KR 24 62 80 SKF open CN 31.4
KRV62-PP krv 24 62 80 FAG 2RS CN 33.5
NUKR-62-A NUKR 24 62 80 SKF open CN 41.3
PWKR-62-2RS PWKR 24 62 80 SKF open CN 31.9
KR-72-PPA KR 24 72 80 SKF open CN 26
KR72-PP kr 24 72 80 FAG 2RS CN 28
KRE72-PP kre 24 72 80 FAG 2RS CN 28
KRV-72-PPA KR 24 72 80 SKF open CN 33
KRV72-PP krv 24 72 80 FAG 2RS CN 36.5
NUKR-72-A NUKR 24 72 80 SKF open CN 45.7
PWKR-72-2RS PWKR 24 72 80 SKF open CN 39.6

Needle Roller Bearings (6)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
NK24-16 NK 24 32 16 SKF open CN 15.4
NK24-16-XL nk 24 32 16 FAG open CN 16.9
NK24-20 NK 24 32 20 SKF open CN 19
NK24-20-XL nk 24 32 20 FAG open CN 21.4
NKS24 NKS 24 37 20 SKF open CN 26
NKS24-XL nks 24 37 20 FAG open CN 29.5

Support Rollers (8)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
NUKR62 nukr 24 62 80 FAG open CN 40.5
NUKRE62 nukre 24 62 80 FAG open CN 40.5
PWKR62-2RS-XL pwkr 24 62 80 FAG 2RS CN 35
PWKRE62-2RS-XL pwkre 24 62 80 FAG 2RS CN 35
NUKR72 nukr 24 72 80 FAG open CN 45
NUKRE72 nukre 24 72 80 FAG open CN 45
PWKR72-2RS-XL pwkr 24 72 80 FAG 2RS CN 39
PWKRE72-2RS-XL pwkre 24 72 80 FAG 2RS CN 39

Exact-dimension interchange groups at 24 mm bore

These d×D×B envelopes at a 24 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:

Selecting a 24 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 24 mm the catalog spans 32–72 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a k5 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 24 mm bore?

This index lists 32 verified bearing models with a 24 mm (0.945 in) bore across 3 bearing types, from 32 to 72 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 32–72 mm OD options for a 24 mm shaft?

On a fixed 24 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 24 mm bearings?

A 24 mm bore on a rotating inner ring normally uses a k5 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). Bore diameters below 20 mm follow the 10/12/15/17 mm exception table rather than code × 5.