MPNbase

15×35×11 mm bearings

34 models from 4 brands across 5 types share this ISO 15 envelope: 15 mm bore, 35 mm outside diameter, 11 mm width (0.591×1.378×0.433 in), 10 mm radial section.

34 models fit this space 4 brands 32 with catalogue C rating

Dimensional interchange — verify before substituting

These bearings are interchangeable on boundary dimensions per ISO 15 — same bore, OD and width. They are not guaranteed drop-in equivalents: compare load ratings, seals, clearance, cage, precision and axial-locating design for the specific duty. Models without a catalogue C rating on this site carry ISO 15 geometry only; request the manufacturer table before a load-critical replacement.

Model Type Brand Seal Clearance C (kN) C0 (kN) Mass (g)
1202 Self-Aligning Ball NTN open — 7.6 1.75 50
1202-ETN9 Self-Aligning Ball SKF open CN 7.41 1.76 49
6202 Deep Groove Ball SKF open CN 8.06 3.75 45
6202-2RS Deep Groove Ball SKF 2RS CN 8.06 3.75 46
6202-2RS-FAG Deep Groove Ball FAG 2RS CN 8.9 3.75 44
6202-2RS-NSK Deep Groove Ball NSK 2RS CN 8.4 3.75 45
6202-2RS-NTN Deep Groove Ball NTN 2RS CN 8.6 3.6 45
6202-FAG Deep Groove Ball FAG open CN 8.9 3.75 42
6202-NSK Deep Groove Ball NSK open CN 8.4 3.75 45
6202-NTN Deep Groove Ball NTN open CN 8.6 3.6 45
6202-RSR Deep Groove Ball SKF RSR CN 8.06 3.75 46
6202-RSR-NSK Deep Groove Ball NSK RSR CN 8.4 3.75 45
6202-RSR-NTN Deep Groove Ball NTN RSR CN 8.6 3.6 45
6202-ZZ Deep Groove Ball SKF ZZ CN 8.06 3.75 48
6202-ZZ-FAG Deep Groove Ball FAG ZZ CN 8.9 3.75 44
6202-ZZ-NSK Deep Groove Ball NSK ZZ CN 8.4 3.75 45
6202-ZZ-NTN Deep Groove Ball NTN ZZ CN 8.6 3.6 45
7202 Angular Contact Ball SKF open CN 8.32 4.4 45
7202-ACCBM Angular Contact Ball SKF open CN 10.2 5.2 45
7202-BE-2RZP Angular Contact Ball SKF RSR CN 8.32 4.4 45
7202-BECBP Angular Contact Ball SKF open CN 8.8 4.65 45
7202-BEP Angular Contact Ball SKF open CN 8.32 4.4 45
7202-NTN Angular Contact Ball NTN open CN 10 4.7 46
7202B Angular Contact Ball NTN open CN 9.25 4.35 46
BMB-6202-032S2-UB008A Sensor Bearing Units SKF — — 7.8 3.75 62
BMB-6202-032S2-UB108A Sensor Bearing Units SKF — — 7.8 3.75 70
BMD-0123-ZJ6 Sensor Bearing Units SKF — — — — —
BMD-0123-ZJ8 Sensor Bearing Units SKF — — — — —
NJ202-ECP Cylindrical Roller SKF open CN 12.5 10.2 48
NU202-ECP Cylindrical Roller SKF open CN 12.5 10.2 47
QJ-202-N2MA Angular Contact Ball SKF open CN 12.7 8.3 62
W6202 Deep Groove Ball SKF open CN 6.37 3.6 42
W6202-2RS Deep Groove Ball SKF 2RS CN 6.37 3.6 44
W6202-ZZ Deep Groove Ball SKF ZZ CN 6.37 3.6 44

Note: catalogue dynamic load ratings for this envelope span 6.4– 12.7 kN — a 99% spread between designs in the very same 15×35×11 mm space. The higher-rated unit is not an upgrade for every duty (it may run at lower limiting speed), but ignoring the gap will over- or under-life the replacement.

Substitution verification checklist

  1. Load rating. Check C (dynamic) and C0 (static) against the original life calculation — the table above shows which models carry verified catalogue values.
  2. Sealing. Open, -ZZ shields and -2RS contact seals are not equivalent in friction, speed or contamination protection; match the housing environment, not just the suffix on the old box.
  3. Internal clearance. CN/C3/C4 changes with fit and operating temperature; an interference inner-ring mount commonly needs C3 where the bench bearing ran CN.
  4. Cage and precision. Stamped steel, machined brass and polymer cages, and P0/P6/P5 tolerance classes, carry different speed and shock limits.
  5. Locating behaviour. Within one envelope an NU cylindrical roller floats axially while an NJ/NUP locates; ball designs take thrust that roller locating schemes do not. Preserve the shaft's locating arrangement.

Browse all 15 mm bore bearings for wider or narrower sections, or open a model page for naming-rule decode, applications and graded cross references: 1202, 1202-ETN9, 6202, 6202-2RS, 6202-2RS-FAG, 6202-2RS-NSK, 6202-2RS-NTN, 6202-FAG, 6202-NSK, 6202-NTN, 6202-RSR, 6202-RSR-NSK, 6202-RSR-NTN, 6202-ZZ, 6202-ZZ-FAG, 6202-ZZ-NSK, 6202-ZZ-NTN, 7202, 7202-ACCBM, 7202-BE-2RZP, 7202-BECBP, 7202-BEP, 7202-NTN, 7202B, BMB-6202-032S2-UB008A, BMB-6202-032S2-UB108A, BMD-0123-ZJ6, BMD-0123-ZJ8, NJ202-ECP, NU202-ECP, QJ-202-N2MA, W6202, W6202-2RS, W6202-ZZ.

Frequently asked questions

Are all 15×35×11 mm bearings interchangeable?

They share the same ISO 15 boundary dimensions — 15 mm bore, 35 mm OD, 11 mm width (0.591×1.378×0.433 in) — so they fit the same shaft, housing bore and axial space. Interchangeability ends at the envelope: dynamic load rating, seal arrangement, internal clearance, cage and precision class differ between the 34 models listed here and must be checked against the duty before substitution.

Is it a drop-in replacement if two bearings both measure 15×35×11?

Only after verification. Confirm five things in order: (1) the C/C0 load ratings meet the original life calculation, (2) the seal type is equivalent or acceptable for the contamination level (open vs -ZZ vs -2RS), (3) internal clearance matches (CN/C3/C4 — an interference fit changes residual play), (4) cage material and precision class suit the speed, and (5) the axial-locating behaviour is the same (for example an NU cylindrical roller floats while an NJ locates one way). Same dimensions alone never guarantee equal performance.

What is 15×35×11 mm in inches?

15×35×11 mm converts to 0.591×1.378×0.433 in, with a 10 mm (0.394 in) radial section height. These are the ISO 15 general-plan envelope dimensions shared across manufacturers, which is why models such as 1202, 1202-ETN9, 6202 mount in the same space despite different internal designs.