MPNbase

15 mm bore bearings

26 models with a 15 mm (0.591 in) bore across 2 bearing types, outside diameters from 24 to 52 mm. Tables are grouped by type; open a model for full specs and equivalents.

26 models 24–52 mm OD range 3 brands

Angular Contact Ball Bearings (3)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
7002 7000 15 32 9 GENERIC-ISO open CN —
7202 7200 15 35 11 GENERIC-ISO open CN —
7302 7300 15 42 13 GENERIC-ISO open CN —

Deep Groove Ball Bearings (23)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
61802 61800 15 24 5 SKF open CN 1.9
61802-2RS 61800 15 24 5 SKF 2RS CN 1.9
61802-RSR 61800 15 24 5 NSK RSR CN 2.28
61802-ZZ 61800 15 24 5 SKF ZZ CN 1.9
61902 61900 15 28 7 SKF open CN 4.36
61902-2RS 61900 15 28 7 SKF 2RS CN 4.36
61902-RSR 61900 15 28 7 SKF RSR CN 4.36
61902-ZZ 61900 15 28 7 SKF ZZ CN 4.36
6002 6000 15 32 9 SKF open CN 5.85
6002-2RS 6000 15 32 9 SKF 2RS CN 5.85
6002-RSR 6000 15 32 9 SKF RSR CN 5.85
6002-ZZ 6000 15 32 9 SKF ZZ CN 5.85
6202 6200 15 35 11 SKF open CN 8.06
6202-2RS 6200 15 35 11 SKF 2RS CN 8.06
6202-RSR 6200 15 35 11 SKF RSR CN 8.06
6202-ZZ 6200 15 35 11 SKF ZZ CN 8.06
6302 6300 15 42 13 SKF open CN 11.9
6302-2RS 6300 15 42 13 SKF 2RS CN 11.9
6302-RSR 6300 15 42 13 SKF RSR CN 11.9
6302-ZZ 6300 15 42 13 SKF ZZ CN 11.9
6402 6400 15 52 15 GENERIC-ISO open CN —
6402-2RS 6400 15 52 15 GENERIC-ISO 2RS CN —
6402-ZZ 6400 15 52 15 GENERIC-ISO ZZ CN —

Exact-dimension interchange groups at 15 mm bore

These d×D×B envelopes at a 15 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:

Selecting a 15 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 15 mm the catalog spans 24–52 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a j5 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 15 mm bore?

This index lists 26 verified bearing models with a 15 mm (0.591 in) bore across 2 bearing types, from 24 to 52 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 24–52 mm OD options for a 15 mm shaft?

On a fixed 15 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 15 mm bearings?

A 15 mm bore on a rotating inner ring normally uses a j5 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). Bore diameters below 20 mm follow the 10/12/15/17 mm exception table rather than code × 5.