180×320×86 mm bearings
14 models from 3 brands across 2 types share this ISO 15 envelope: 180 mm bore, 320 mm outside diameter, 86 mm width (7.087×12.598×3.386 in), 70 mm radial section.
14 models fit this space 3 brands 14 with catalogue C rating
Dimensional interchange — verify before substituting
These bearings are interchangeable on boundary dimensions per ISO 15 — same bore, OD and width. They are not guaranteed drop-in equivalents: compare load ratings, seals, clearance, cage, precision and axial-locating design for the specific duty. Models without a catalogue C rating on this site carry ISO 15 geometry only; request the manufacturer table before a load-critical replacement.
| Model | Type | Brand | Seal | Clearance | C (kN) | C0 (kN) | Mass (g) |
|---|---|---|---|---|---|---|---|
| 22236EMD1 | Spherical Roller | NTN | open | CN | 1450 | 1660 | 29300 |
| 22236EMKD1 | Spherical Roller | NTN | open | CN | 1450 | 1660 | 28700 |
| N2236 | Cylindrical Roller | NTN | open | CN | 825 | 1140 | 27800 |
| NCF2236-ECJB | Cylindrical Roller | SKF | open | CN | 1200 | 1600 | 30000 |
| NJ2236 | Cylindrical Roller | NTN | open | CN | 825 | 1140 | 27800 |
| NJ2236-ECML | Cylindrical Roller | SKF | open | CN | 1100 | 1430 | 30000 |
| NJ2236E | Cylindrical Roller | NTN | open | CN | 1120 | 1510 | — |
| NU2236 | Cylindrical Roller | NTN | open | CN | 825 | 1140 | 27800 |
| NU2236-ECML | Cylindrical Roller | SKF | open | CN | 1100 | 1430 | 30000 |
| NU2236E | Cylindrical Roller | NTN | open | CN | 1120 | 1510 | — |
| NUH2236-ECMH | Cylindrical Roller | SKF | open | CN | 1200 | 1600 | 29500 |
| NUP2236 | Cylindrical Roller | NTN | open | CN | 825 | 1140 | 27800 |
| NUP2236E | Cylindrical Roller | NTN | open | CN | 1120 | 1510 | — |
| SL182236 | Cylindrical Roller | FAG | open | CN | 1180 | 1760 | 29800 |
Substitution verification checklist
- Load rating. Check C (dynamic) and C0 (static) against the original life calculation — the table above shows which models carry verified catalogue values.
- Sealing. Open, -ZZ shields and -2RS contact seals are not equivalent in friction, speed or contamination protection; match the housing environment, not just the suffix on the old box.
- Internal clearance. CN/C3/C4 changes with fit and operating temperature; an interference inner-ring mount commonly needs C3 where the bench bearing ran CN.
- Cage and precision. Stamped steel, machined brass and polymer cages, and P0/P6/P5 tolerance classes, carry different speed and shock limits.
- Locating behaviour. Within one envelope an NU cylindrical roller floats axially while an NJ/NUP locates; ball designs take thrust that roller locating schemes do not. Preserve the shaft's locating arrangement.
Browse all 180 mm bore bearings for wider or narrower sections, or open a model page for naming-rule decode, applications and graded cross references: 22236EMD1, 22236EMKD1, N2236, NCF2236-ECJB, NJ2236, NJ2236-ECML, NJ2236E, NU2236, NU2236-ECML, NU2236E, NUH2236-ECMH, NUP2236, NUP2236E, SL182236.
Frequently asked questions
Are all 180×320×86 mm bearings interchangeable?
They share the same ISO 15 boundary dimensions — 180 mm bore, 320 mm OD, 86 mm width (7.087×12.598×3.386 in) — so they fit the same shaft, housing bore and axial space. Interchangeability ends at the envelope: dynamic load rating, seal arrangement, internal clearance, cage and precision class differ between the 14 models listed here and must be checked against the duty before substitution.
Is it a drop-in replacement if two bearings both measure 180×320×86?
Only after verification. Confirm five things in order: (1) the C/C0 load ratings meet the original life calculation, (2) the seal type is equivalent or acceptable for the contamination level (open vs -ZZ vs -2RS), (3) internal clearance matches (CN/C3/C4 — an interference fit changes residual play), (4) cage material and precision class suit the speed, and (5) the axial-locating behaviour is the same (for example an NU cylindrical roller floats while an NJ locates one way). Same dimensions alone never guarantee equal performance.
What is 180×320×86 mm in inches?
180×320×86 mm converts to 7.087×12.598×3.386 in, with a 70 mm (2.756 in) radial section height. These are the ISO 15 general-plan envelope dimensions shared across manufacturers, which is why models such as 22236EMD1, 22236EMKD1, N2236 mount in the same space despite different internal designs.