MPNbase

800 mm bore bearings

14 models with a 800 mm (31.496 in) bore across 4 bearing types, outside diameters from 980 to 1360 mm. Tables are grouped by type; open a model for full specs and equivalents.

14 models 980–1360 mm OD range 1 brand

CARB Toroidal Roller Bearings (3)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
C39-800-M C3900 800 1060 195 SKF open CN 6400
C30-800-KMB C3000 800 1150 258 SKF open CN 9300
C30-800-MB C3000 800 1150 258 SKF open CN 9300

Cylindrical Roller Bearings (5)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
NCF18-800-V NCF1800 800 980 82 SKF open CN 1940
NU18-800-ECMA NU1800 800 980 82 SKF open CN 1720
NCF28-800-V NCF2800 800 980 106 SKF open CN 2750
NCF29-800-V NCF2900 800 1060 150 SKF open CN 4950
NU20-800-ECMA NU2000 800 1150 200 SKF open CN 7040

Deep Groove Ball Bearings (3)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
618-800-MA 61800 800 980 82 SKF open CN 559
619-800-MA 61900 800 1060 115 SKF open CN 832
60-800-N1MAS 6000 800 1150 155 SKF open CN 1010

Spherical Roller Thrust Bearings (3)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
292-800-EM 29200 800 1060 155 SKF open CN 6560
293-800-EM 29300 800 1180 230 SKF open CN 11300
294-800-EF 29400 800 1360 335 SKF open CN 20200

Exact-dimension interchange groups at 800 mm bore

These d×D×B envelopes at a 800 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:

Selecting a 800 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 800 mm the catalog spans 980–1360 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a m6 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 800 mm bore?

This index lists 14 verified bearing models with a 800 mm (31.496 in) bore across 4 bearing types, from 980 to 1360 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 980–1360 mm OD options for a 800 mm shaft?

On a fixed 800 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 800 mm bearings?

A 800 mm bore on a rotating inner ring normally uses a m6 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). In the ISO designation system 800 mm is bore code 160 (code × 5), so a 62-series bearing with this bore is the 62160.