MPNbase

60×110×28 mm bearings

31 models from 3 brands across 5 types share this ISO 15 envelope: 60 mm bore, 110 mm outside diameter, 28 mm width (2.362×4.331×1.102 in), 25 mm radial section.

31 models fit this space 3 brands 31 with catalogue C rating

Dimensional interchange — verify before substituting

These bearings are interchangeable on boundary dimensions per ISO 15 — same bore, OD and width. They are not guaranteed drop-in equivalents: compare load ratings, seals, clearance, cage, precision and axial-locating design for the specific duty. Models without a catalogue C rating on this site carry ISO 15 geometry only; request the manufacturer table before a load-critical replacement.

Model Type Brand Seal Clearance C (kN) C0 (kN) Mass (g)
2212 Self-Aligning Ball NTN open — 34 12.6 1100
2212-E-2RS1KTN9 Self-Aligning Ball SKF 2RS CN 31.2 12.2 1050
2212-E-2RS1TN9 Self-Aligning Ball SKF 2RS CN 31.2 12.2 1050
2212-EKTN9 Self-Aligning Ball SKF open CN 48.8 17 1100
2212-ETN9 Self-Aligning Ball SKF open CN 48.8 17 1100
2212K Self-Aligning Ball NTN open — 34 12.6 1100
22212 Spherical Roller SKF open CN 159 166 1150
22212-EK Spherical Roller SKF open CN 159 166 1450
22212EAD1 Spherical Roller NTN open CN 187 181 1140
22212EAKD1 Spherical Roller NTN open CN 187 181 1120
22212EMD1 Spherical Roller NTN open CN 179 171 1150
22212EMKD1 Spherical Roller NTN open CN 179 171 1130
4212-ATN9 Deep Groove Ball SKF open CN 57.2 55 1100
62212-2RS Deep Groove Ball SKF 2RS CN 52.7 36 1000
C2212-KTN9 CARB Toroidal Roller SKF open CN 143 156 1100
C2212-KV CARB Toroidal Roller SKF open CN 166 190 1150
C2212-TN9 CARB Toroidal Roller SKF open CN 143 156 1100
C2212-V CARB Toroidal Roller SKF open CN 166 190 1150
N2212 Cylindrical Roller NTN open CN 107 116 1040
N2212EA Cylindrical Roller NTN open CN 155 157 1080
NF2212EA Cylindrical Roller NTN open CN 155 157 1080
NJ2212 Cylindrical Roller NTN open CN 107 116 1040
NJ2212-ECP Cylindrical Roller SKF open CN 146 153 1100
NJ2212EA Cylindrical Roller NTN open CN 155 157 1080
NU2212 Cylindrical Roller SKF open CN 146 153 1050
NU2212-NTN Cylindrical Roller NTN open CN 107 116 1040
NU2212EA Cylindrical Roller NTN open CN 155 157 1080
NUP2212 Cylindrical Roller NTN open CN 107 116 1040
NUP2212-ECP Cylindrical Roller SKF open CN 146 153 1100
NUP2212EA Cylindrical Roller NTN open CN 155 157 1080
SL182212-XL Cylindrical Roller FAG open CN 169 176 1180

Note: catalogue dynamic load ratings for this envelope span 31.2– 187.0 kN — a 499% spread between designs in the very same 60×110×28 mm space. The higher-rated unit is not an upgrade for every duty (it may run at lower limiting speed), but ignoring the gap will over- or under-life the replacement.

Substitution verification checklist

  1. Load rating. Check C (dynamic) and C0 (static) against the original life calculation — the table above shows which models carry verified catalogue values.
  2. Sealing. Open, -ZZ shields and -2RS contact seals are not equivalent in friction, speed or contamination protection; match the housing environment, not just the suffix on the old box.
  3. Internal clearance. CN/C3/C4 changes with fit and operating temperature; an interference inner-ring mount commonly needs C3 where the bench bearing ran CN.
  4. Cage and precision. Stamped steel, machined brass and polymer cages, and P0/P6/P5 tolerance classes, carry different speed and shock limits.
  5. Locating behaviour. Within one envelope an NU cylindrical roller floats axially while an NJ/NUP locates; ball designs take thrust that roller locating schemes do not. Preserve the shaft's locating arrangement.

Browse all 60 mm bore bearings for wider or narrower sections, or open a model page for naming-rule decode, applications and graded cross references: 2212, 2212-E-2RS1KTN9, 2212-E-2RS1TN9, 2212-EKTN9, 2212-ETN9, 2212K, 22212, 22212-EK, 22212EAD1, 22212EAKD1, 22212EMD1, 22212EMKD1, 4212-ATN9, 62212-2RS, C2212-KTN9, C2212-KV, C2212-TN9, C2212-V, N2212, N2212EA, NF2212EA, NJ2212, NJ2212-ECP, NJ2212EA, NU2212, NU2212-NTN, NU2212EA, NUP2212, NUP2212-ECP, NUP2212EA, SL182212-XL.

Frequently asked questions

Are all 60×110×28 mm bearings interchangeable?

They share the same ISO 15 boundary dimensions — 60 mm bore, 110 mm OD, 28 mm width (2.362×4.331×1.102 in) — so they fit the same shaft, housing bore and axial space. Interchangeability ends at the envelope: dynamic load rating, seal arrangement, internal clearance, cage and precision class differ between the 31 models listed here and must be checked against the duty before substitution.

Is it a drop-in replacement if two bearings both measure 60×110×28?

Only after verification. Confirm five things in order: (1) the C/C0 load ratings meet the original life calculation, (2) the seal type is equivalent or acceptable for the contamination level (open vs -ZZ vs -2RS), (3) internal clearance matches (CN/C3/C4 — an interference fit changes residual play), (4) cage material and precision class suit the speed, and (5) the axial-locating behaviour is the same (for example an NU cylindrical roller floats while an NJ locates one way). Same dimensions alone never guarantee equal performance.

What is 60×110×28 mm in inches?

60×110×28 mm converts to 2.362×4.331×1.102 in, with a 25 mm (0.984 in) radial section height. These are the ISO 15 general-plan envelope dimensions shared across manufacturers, which is why models such as 2212, 2212-E-2RS1KTN9, 2212-E-2RS1TN9 mount in the same space despite different internal designs.