MPNbase

22 mm bore bearings

24 models with a 22 mm (0.866 in) bore across 2 bearing types, outside diameters from 28 to 56 mm. Tables are grouped by type; open a model for full specs and equivalents.

24 models 28–56 mm OD range 2 brands

Deep Groove Ball Bearings (3)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
62-22 6200 22 50 14 SKF open CN 14
62-22-2RS 6200 22 50 14 SKF 2RS CN 14
63-22 6300 22 56 16 SKF open CN 18.6

Needle Roller Bearings (21)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
HK2210 HK 22 28 10 SKF open CN 7.21
HK2212 HK 22 28 12 SKF open CN 8.8
HK2212FM HK 22 28 12 NTN open — 9.2
HK2216 HK 22 28 16 SKF open CN 13
HK2216-2RS HK 22 28 16 SKF 2RS CN 8.8
HK2216F HK 22 28 16 NTN open — 13.2
HK2220 HK 22 28 20 SKF open CN 15.7
HK2220-2RS HK 22 28 20 SKF 2RS CN 13
HK2220F HK 22 28 20 NTN open — 16.8
RNA4903 RNA-49 22 30 13 SKF open CN 11.4
RNA4903-2RS RNA-49 22 30 13 SKF 2RS CN 9.52
NK22-16 NK 22 30 16 SKF open CN 14.2
NK22-20 NK 22 30 20 SKF open CN 17.9
RNA6903 RNA-69 22 30 23 SKF open CN 18.7
NKI22-16 NKI 22 34 16 SKF open CN 15.7
NKI22-20 NKI 22 34 20 SKF open CN 19.4
NA49-22 NA-49 22 39 17 SKF open CN 23.3
NKIA59-22 NKIA 22 39 23 SKF open CN 23.3
NKIB59-22 NKIB 22 39 25 SKF open CN 23.3
NA69-22 NA-69 22 39 30 SKF open CN 36.9
PNA22-44 PNA 22 44 20 SKF open CN 22

Exact-dimension interchange groups at 22 mm bore

These d×D×B envelopes at a 22 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:

Selecting a 22 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 22 mm the catalog spans 28–56 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a k5 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 22 mm bore?

This index lists 24 verified bearing models with a 22 mm (0.866 in) bore across 2 bearing types, from 28 to 56 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 28–56 mm OD options for a 22 mm shaft?

On a fixed 22 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 22 mm bearings?

A 22 mm bore on a rotating inner ring normally uses a k5 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). Bore diameters below 20 mm follow the 10/12/15/17 mm exception table rather than code × 5.