MPNbase

110 mm bore bearings

38 models with a 110 mm (4.331 in) bore across 5 bearing types, outside diameters from 140 to 240 mm. Tables are grouped by type; open a model for full specs and equivalents.

38 models 140–240 mm OD range 4 brands

Angular Contact Ball Bearings (3)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
7022 7000 110 170 28 GENERIC-ISO open CN —
7222 7200 110 200 38 GENERIC-ISO open CN —
7322 7300 110 240 50 GENERIC-ISO open CN —

Deep Groove Ball Bearings (21)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
61822 61800 110 140 16 SKF open CN 28.1
61822-2RS 61800 110 140 16 SKF 2RS CN 28.1
61822-RSR 61800 110 140 16 SKF RSR CN 28.1
61822-ZZ 61800 110 140 16 NSK ZZ CN 31
61922 61900 110 150 20 SKF open CN 43.6
61922-2RS 61900 110 150 20 NSK 2RS CN 48
61922-RSR 61900 110 150 20 NSK RSR CN 48
61922-ZZ 61900 110 150 20 NSK ZZ CN 48
16022 16000 110 170 19 NTN open CN 63.5
6022 6000 110 170 28 SKF open CN 85.2
6022-2RS 6000 110 170 28 SKF 2RS CN 85.2
6022-RSR 6000 110 170 28 NSK RSR CN 93
6022-ZZ 6000 110 170 28 SKF ZZ CN 85.2
6222 6200 110 200 38 SKF open CN 151
6222-2RS 6200 110 200 38 SKF 2RS CN 151
6222-RSR 6200 110 200 38 NSK RSR CN 159
6222-ZZ 6200 110 200 38 SKF ZZ CN 151
6322 6300 110 240 50 SKF open CN 203
6322-2RS 6300 110 240 50 NTN 2RS CN 227
6322-RSR 6300 110 240 50 NTN RSR CN 227
6322-ZZ 6300 110 240 50 NSK ZZ CN 226

Self-Aligning Ball Bearings (6)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
1222 1200 110 200 38 NTN open — 87
1222K 1200 110 200 38 NTN open — 87
2222 2200 110 200 53 NTN open — 122
2222K 2200 110 200 53 NTN open — 122
1322 1300 110 240 50 NTN open — 161
1322K 1300 110 240 50 NTN open — 161

Spherical Roller Bearings (4)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
23022 23000 110 170 45 GENERIC-ISO open CN —
22222 22200 110 200 53 GENERIC-ISO open CN —
21322 21300 110 240 50 GENERIC-ISO open CN —
22322 22300 110 240 80 GENERIC-ISO open CN —

Tapered Roller Bearings (4)

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
32022 32000 110 170 38 GENERIC-ISO open CN —
30222 30200 110 200 41 GENERIC-ISO open CN —
32222 32200 110 200 56 GENERIC-ISO open CN —
32322 32300 110 240 84.5 GENERIC-ISO open CN —

Exact-dimension interchange groups at 110 mm bore

These d×D×B envelopes at a 110 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:

Selecting a 110 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 110 mm the catalog spans 140–240 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a m6 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 110 mm bore?

This index lists 38 verified bearing models with a 110 mm (4.331 in) bore across 5 bearing types, from 140 to 240 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 140–240 mm OD options for a 110 mm shaft?

On a fixed 110 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 110 mm bearings?

A 110 mm bore on a rotating inner ring normally uses a m6 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). In the ISO designation system 110 mm is bore code 22 (code × 5), so a 62-series bearing with this bore is the 6222.