FAG bearings
17 verified FAG models in the database, 15–200 mm bore, across 1 bearing type. Each model page cites the source catalogue and carries graded cross references.
17 models 15–200 mm bore range Founded 1883 in Schweinfurt, Germany; part of the Schaeffler Group since 2001
About FAG
FAG (Fischer's Aktien-Gesellschaft) is the rolling-bearing brand of the Schaeffler Group, covering deep-groove ball bearings, angular-contact and roller bearings. Current-generation deep-groove sizes carry the Generation-C internal-design marker and ISO 15 boundary dimensions.
Reading FAG designations
FAG deep-groove designations share the ISO base-number system (e.g. 6205) and add brand-specific suffixes: -C for the Generation-C internal design, -2Z for shields, -2RSR for contact seals, and -2HRS for high-precision contact seals on Generation-C sizes. See the designation guide for the full decode. How to read bearing numbers →
| Model | Series | d (mm) | D (mm) | B (mm) | Seal | Clearance | C (kN) |
|---|---|---|---|---|---|---|---|
| 16002 | 16000 | 15 | 32 | 8 | open | CN | 5.59 |
| 16003 | 16000 | 17 | 35 | 8 | open | CN | 6 |
| 16004 | 16000 | 20 | 42 | 8 | open | CN | 7.91 |
| 16005 | 16000 | 25 | 47 | 8 | open | CN | 8.86 |
| 16006 | 16000 | 30 | 55 | 9 | open | CN | 11.22 |
| 16007 | 16000 | 35 | 62 | 9 | open | CN | 12.26 |
| 16008 | 16000 | 40 | 68 | 9 | open | CN | 12.62 |
| 16011 | 16000 | 55 | 90 | 11 | open | CN | 19.3 |
| 16026 | 16000 | 130 | 200 | 22 | open | CN | 84 |
| 16028 | 16000 | 140 | 210 | 22 | open | CN | 86 |
| 16030 | 16000 | 150 | 225 | 24 | open | CN | 98 |
| 16032 | 16000 | 160 | 240 | 25 | open | CN | 109 |
| 16034 | 16000 | 170 | 260 | 28 | open | CN | 131 |
| 6034-2RS | 6000 | 170 | 260 | 42 | 2RS | CN | 179 |
| 16036 | 16000 | 180 | 280 | 31 | open | CN | 140 |
| 16038 | 16000 | 190 | 290 | 31 | open | CN | 158 |
| 16040 | 16000 | 200 | 310 | 34 | open | CN | 186 |
Replacing an FAG bearing
Work from the dimensions finder when the goal is a cross-brand substitute: the exact-envelope tables compare every model sharing the same d×D×B with its load rating and seal/clearance options. For a same-brand successor, open the model page and follow its full/partial/verify cross reference grading.
Frequently asked questions
Where can I find FAG bearing cross references?
Every FAG model page on MPN Base carries a graded cross reference table — full matches with identical boundary dimensions and ratings within tolerance, partial matches requiring verification, and model-only correspondences to check manually. Start from this brand list or the cross reference tool and open a model for its equivalents.
Are FAG bearings interchangeable with other brands?
Boundary dimensions follow ISO 15, so same-designation models from different brands mount in the same shaft and housing space. They are not automatic equivalents: compare C/C0 load ratings, seal type, internal clearance, cage and precision class for the actual duty. Dimension-based interchange tables list the candidates side by side.
Is MPN Base an authorized FAG distributor?
No. MPN Base is an independent reference database. FAG and its product designations are trademarks of their owner and are used on this site for identification purposes only; specifications are cited to the public catalogue version and current production values should be verified with the manufacturer or an authorized distributor.